Asus RS100-E9-P12 User Manual page 84

13. Auxiliary panel connector (20-2 pin AUX_PANEL1)
This connector is for additional front panel features including front panel SMB, locator
LED and switch, chassis intrusion, and LAN LEDs.
1. Front panel SMB (6-1 pin FPSMB)
These connectors connect the front panel SMBus cable.
2. LAN activity LED (2-pin LAN1LINK and 2-pin LAN2LINK)
These connectors are for Gigabit LAN activity LEDs on the front panel.
3. Locator LED (2-pin AUX_LOCLED1 and 2-pin AUX_LOCLED2)
These connectors are for the Locator LED1 and LED2 on the front panel. Connect
the Locator LED cables to these 2-pin connectors. The LEDs will light up when
the Locator button is pressed.
4. Locator Button/Switch (2-pin AUX_BMCLOCBTN)
These connectors are for the locator button on the front panel. This button queries
the state of the system locator.
4-24 Chapter 4: Motherboard Information