4.
Insert a 3.5-inch Serial ATA HDD
into the HDD drive tray.
Ensure that the 3.5-inch SATA HDD
is seated securely in place.
5.
Secure the 3.5-inch Serial ATA HDD
into the HDD drive tray using the
bundled set of screws (as shown).
6.
Connect the SATA signal cable and
the power cable from the power
supply to the 3.5-inch HDD.
Use an L-type SATA connector to
connect the 3.5-inch SATA HDD to
the motherboard.
2-14
SATA power cable
Chapter 2: Hardware Information
SATA signal cable