Installing The Cpu Heatsink - Asus RS200-E9-PS2 User Manual

2.2.2

Installing the CPU heatsink

To install the CPU heatsink:
1. Remove the protection sticker on the
back of the CPU heatsink.
2. Place the heatsink on top of the
installed CPU, ensuring that the four
fasteners match the holes on the
motherboard.
3. Twist each of the six (6) screws with
a Phillips (cross) screwdriver just
enough to attach the heatsink and air
duct to the motherboard. When the
six (6) screws are attached, tighten
them one by one to completely secure
the heatsink and air duct.
• Tighten the four heatsink screws in a diagonal sequence.
• Do not remove the mylar on the heatsink.
ASUS RS200-E9 Series 2-7