5.11
Event Logs menu
The Event Logs menu items allow you to change the event log settings and view the system
event logs.
Change Smbios Event Log Settings
Smbios Event Log [Enabled]
Change this to enable or disable all features of Smbios Event Logging during boot.
Configuration options: [Disabled] [Enabled]
Erase Event Log [No]
Choose options for erasing Smbios Event Log. Erasing is done prior to any logging
activation during reset.
Configuration options: [No] [Yes, Next reset] [Yes, Every reset]
When Log is Full [Do Nothing]
Allows you to choose options for reactions to a full Smbios Event Log.
Configuration options: [Do Nothing] [Erase Immediately]
Log System Boot Event [Disabled]
Allows you to enable or disable logging of System boot event.
Configuration options: [Enabled] [Disabled]
MECI [1]
Allows you to set the value for the number of occurences of a duplicate event that must
pass before the multiple‑event counter of log entry is updated. Use the <+> and <‑>
keys to adjust the value.
Configuration options: [1] - [255]
5-46
Chapter 5: BIOS Setup