Features; Absolute Maximum Ratings - Hitachi L26HP03E Service Manual

single power supply over a wide range of voltages. Operation from split power supplies
is also possible and the low power supply current drain is independent of the magnitude
of the power supply voltage. Application areas include transducer amplifiers, dc gain
blocks and all the conventional op amp circuits which now can be more easily
implemented in single power supply systems. For example, the LM158 series can be
directly operated off of the standard +5V power supply voltage which is used in digital
systems and will easily provide the required interface electronics without requiring the
additional ±15V power supplies. The LM358 and LM2904 are available in a chip sized
package (8-Bump micro SMD) using National's micro SMD package technology.

15.10.2. Features

Available in 8-Bump micro SMD chip sized package,
Internally frequency compensated for unity gain
Large dc voltage gain: 100 dB
Wide bandwidth (unity gain): 1 MHz (temperature compensated)
Wide power supply: Single supply: 3V to 32V or dual supplies: ±1.5V to ±16V
Low supply current drain (500 μA)—essentially independent of supply voltage
Low input offset voltage: 2 mV
Input common-mode voltage range includes ground
Differential input voltage range equal to the power supply voltage
Large output voltage swing

15.10.3. Absolute Maximum Ratings