Hitachi L26HP03E Service Manual page 12

8 configurable CVBS & Y/C S-video inputs
Supports Teletext level-1.5, WSS, VPS, Closed-caption, and V-chip
Macrovision detection
CVBS video output
Video IF for Multi-Standard Analog TV
Digital low IF architecture
Stepped-gain PGA with 26 dB tuning range and 1 dB tuning resolution
Maximum IF analog gain of 37dB in addition to digital gain
Programmable TOP to accommodate different tuner gain to optimize noise and
linearity performance
Multi-Standard TV Sound Decoder
Supports BTSC/NICAM/A2/EIA-J demodulation and decoding
FM stereo & SAP demodulation
L/Rx4, mono, and SIF audio inputs
L/Rx3 loudspeaker and line outputs
Supports sub-woofer output
Built-in audio output DAC's
Audio processing for loudspeaker channel, including volume, balance, mute,
tone, EQ, and virtual stereo/surround
Optional advanced surround available (Dolby1, SRS2, BBE3... etc)
Digital Audio Interface
I2S digital audio input & output
S/PDIF digital audio input & output
HDMI audio channel processing capability
Programmable delay for audio/video synchronization
Analog RGB Compliant Input Ports
Three analog ports support up to UXGA
Supports HDTV RGB/YPbPr/YCbCr
Supports Composite Sync and SOG (Sync-on-Green) separator
Automatic color calibration
DVI/HDCP/HDMI Compliant Input Port
Two HDMI input ports with built-in switch
Supports TMDS clock up to 225MHz @ 1080P 60Hz with 12-bit deep-color
resolution
Single link on-chip DVI 1.0 compliant receiver
High-bandwidth Digital Content Protection(HDCP) 1.1 compliant receiver