Volvo V90 2018 Owner's Manual Supplement page 99

Mounting
Before installing the steel grid, the existing plas-
tic ceiling mounting consoles must be replaced
by steel ones. This should preferably be done by
a trained and qualified Volvo service technician.
1. Fold down the rear seat backrests.
2. Be sure that the steel grid is turned in the
right direction. Lift the grid into the vehicle
through one of the rear doors.
3. Place the grid's attachment points in the
ceiling mounting consoles.
This is easier to do if two people hold the
grid in the correct position prior to the follow-
ing step.
Installation instruction no. 31659257.
2
4. Insert the screw included in the kit into the
hole and tighten it. Do the same on the
opposite side.
> Check that the steel grid is securely
attached.
For additional information about the installation
procedure and the tools required, see the instal-
2
lation instructions included with the steel grid
kit.
NOTE
The steel grid cannot be folded up or down
when the optional cargo compartment cover
is in place.
Related information
•
Cargo net (p. 95)
•
Cargo compartment cover* (p. 98)
•
Load anchoring eyelets (p. 98)
PRACTICAL INFORMATION
•
Loading (p. 92)
97
* Option/accessory.