Specifications - SoftBank 820SH Instructions Manual

Table of Contents

Advertisement

Specifications

SoftBank 820SH
Weight
Approximately 103 g
Continuous
Approximately 220 minutes
Talk Time
Continuous
Approximately 300 hours
Standby Time
(handset closed)
Continuous Video
Approximately 120 minutes
Call Talk Time
AC Charger:
Charging Time
Approximately 140 minutes
(power off)
In-Car Charger:
Approximately 140 minutes
Approximately 49 x 101.5 x
Dimensions
13.4 mm (handset closed,
(W x H x D)
without protruding parts)
Maximum Output
0.25 W
. Above values calculated with battery
installed.
. Continuous Talk Time is an average
measured with a new, fully charged battery,
with stable signals.
. Continuous Standby Time is an average
measured with a new, fully charged battery,
with handset closed without calls or
operations, in Standby with stable signals.
. Talk Time/Standby Time may vary by
environment, status, settings, etc.
. Display employs precision technology,
however, some pixels may appear brighter/
darker.
18
14-
Q Handset Materials
Parts
Materials & Finishing
Nylon resin/SUS
Housing (Display side)
(insert-molded), two-part
coating/UV painting
Nylon resin, discontinuous
Housing (Display back
deposition/UV painting
side hinge)
(Nylon resin, UV painting
for Gold, White and Pink)
SUS, two-part coating/
Housing (Display back
UV painting
side)
(SUS, electrodeposition
coating for Silver)
Nylon resin/SUS
Housing (Keypad side)
(inset-molded), UV
painting
Housing (battery side),
ABS resin, UV painting
Battery Cover, Antenna
ABS resin, discontinuous
Housing (hinge)
deposition/UV painting
Display window, lens
cover, External Display
Acrylic resin
window
Small Light cover
ABS resin
Infrared Port
ABS resin (infrared grade)
Portrait/Macro Selector
POM resin
Multi Selector, Center
SUS
Key
Parts
Materials & Finishing
Start Key, Power On/
Off Key, Mail Key,
Yahoo! Keitai Key, Side
Key, Shortcuts & A/a
PC resin
Key, Clear/Back Key,
TV/Text Key, Multi Job/
Manner Key, Keypad
Memory Card Slot
PC resin/Elastomeric
Cover, Headphone Port
resin, UV painting
Cover
External Device Port
Elastomeric resin/UV
Cover
painting
SUS/Gold plating
Charger Terminal
(sealer: nickel)
Screw (all pieces)
SWCH16A/Ni plating
Copper alloy/Gold
USIM pin
plating (sealer: nickel)
Accessories
Q Battery
Voltage
3.7V
Battery Type
Lithium-ion
Capacity
720 mAh
Dimensions
Approximately 35.2 x 51.9 x 4 mm
(W x H x D)
(without protruding parts)

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

821sh

Table of Contents