Table of Contents
Advertisement
Operating Procedures
If an error has occurred, check for the following causes:
Error description
No paper cassette has been
loaded.
The paper cassette has been
loaded facing in the wrong
direction.
There is no more paper.
A paper misfeed occurred.
A transmission error occurred.
An overheat error occurred.
If a system error has occurred:
The printer may be damaged. Contact your Brother dealer or
Brother Customer Support.
10
Remedy
Correctly load a paper cassette
containing paper
(
see page 17).
Remove the paper cassette
once, or turn off and on the
printer to clear the error.
Remove the misfed paper
(
see page 22).
If you do not remove the misfed
paper after turning off and on
the printer, the error persists.
Clean the paper feed roller and
remove paper powder
(
see page 25).
Check the transmission status
(
see page 14).
Wait for a few seconds. If the
printer has recovered from the
error, resend the data to resume
printing.
If the printer does not recover
during a Bluetooth connection,
re-establish the connection.
The inside of the printer has
started to overheat. Wait until it
cools down.
If an overheat error has occurred
during the printing process, the
paper being printed is fed and
discharged.
Advertisement
Table of Contents
