Startup Type - Hitachi CP-SX635W Service Manual

6-13 HIDDEN SERVICE MENU
HIDDEN SERVICE
AIR-SENSOR EXECUTE
LAMP ALARM NONE

STARTUP TYPE

1
BNC TERMINATION TTL
SYNC SLICE LEVEL-1 4
SYNC SLICE LEVEL-2 4
PJLink TURN OFF
PANEL TIME 1234h
LONG KEY NORMAL
NETWORK RESET
SOFT RESET
AIR - SENSOR
Execute this item to adjust the air sensor.
LAMP ALARM
Select the lamp alarm level. 3 Level
"3 Level" shows three kinds of lamp-messages according to the LAMP TIME count.
"1 Level" shows one kind of lamp-message according to the LAMP TIME count.
"None" shows no lamp-messages. It is the factory default setting.
STARTUP TYPE
Select the startup screen type. 1 : shows Hitachi Logo
BNC TERMINATION
Select the RGB2 (BNC) Terminator. 75 ohm
SYNC SLICE LEVEL-1
Set the Sync separation slice level of the RGB1. (1~7)
SYNC SLICE LEVEL-2
Set the Sync separation slice level of the RGB2 (BNC). (1~7)
PJLink
Select the PJLink. Turn off
PANEL TIME
Use time of LCD panel. Reset the PANEL TIME when-
ever you changed the LCD/LENS prism assembly.
6-14 RUN TIME window
Set operating time display method (accumulated lamp time display method)
1. Select "OPTION" from the Advanced menu, then place the cursor on the "LAMP TIME".
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or more to display
the screen shown below. (The menu will close after 10 seconds if there are no further operations.)
4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.)
Usage status number
CP-SX635(ED3SX40N)
To display the OSD for "HIDDEN SERVICE MENU" set up.
By the control panel
1. Display the Advanced menu by the
"MENU" button.(If EASY MENU
appears, choose "Go to Advanced
menu" to display ADVANCED MENU.)
2. Select the "OPTION" on the menu.
3. Continue press the button [ ] fi rst,
then press the button [ ] together
with "INPUT", and hold for 3 seconds.
1 Level None
2 : No Hitachi Logo
TTL
Turn on
RUN TIME
LAMP 1234 h
NORMAL 1000 h
WHISPER 234 h
AC 2000 h
On 1
Off 0
No.0
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
35
By the remote control transmitter
1. Display the menu by the "MENU"
button. (If EASY MENU appears,
choose "Go to Advanced menu" to
display ADVANCED MENU.)
2. Select the "OPTION" on the menu.
3. Press the "MAGNIFY OFF" button.
Next hold the "MAGNIFY OFF"
button for 3 seconds.
LONG KEY
Select the remote control button operation mode.
NORMAR LONGThe LONG allows to control the pro-
jector with the remote control unit when you hold a
button of it for about 3seconds, and makes MY
BUTTON 1/2 function as LONG KEY DISABLE/LONG
KEY ENABLE compulsorily. If you use these buttons to
control the projector as you assigned with the MY
BUTTON menu, set to the NORMAL.
NETWORK RESET
If this is executed, all of the network setting are initial-
ized.
SOFT RESET
If this is executed, all of the user data is initialized.
Never use it when not required.
Lamp time
Lamp time(Normal)
Lamp time(Whisper)
AC energizing time
Number of times on
Number of times off
Usage status number(See below)