Syncing Collar And Remote - Lobo Commander 601TC Quick Start Manual

Syncing Collar and Remote

If the collar for any reason loses connectivity with the remote, simply reset the collar by lifting
the rubber cover over the charging port of the collar. There is a small hole next to the charging
port. Insert the end of a paper clip or any similar item in the hole. This will cause the red LED
to ash slowly. Now press either the collar tone, shock, or vibrate button on the remote. This
will cause the red LED on the collar to ash quickly. The remote and collar are now properly
connected. Be sure to replace the rubber cover over the charging port.
Charging Port
Reset
Collar Top View