Page 3
Charging Collar and Remote Please charge the collar and the remote before rst use. For both remote and collar, full charge takes approximate 3 hrs. Please DO NOT overcharge units as it may cause damage. When charging the remote, the battery icon on the remotes screen will ash as the unit charges.
Page 4
Syncing Collar and Remote If the collar for any reason loses connectivity with the remote, simply reset the collar by lifting the rubber cover over the charging port of the collar. There is a small hole next to the charging port.
Page 5
Sleep Mode Both the collar and the remote have an automatic sleep mode to conserve battery life. The remote will enter sleep mode after there is no activity for one and a half minutes. To awaken the remote, simply give the power button or the programming button a quick press.
Page 6
Remote Operation Power Button Collar Tone Button MENU Shock Button Menu / Mode Button Vibrate Button Remote Tone Button...
Page 7
Power Button - Press and hold button down for 2-3 seconds to turn on/o remote. Quickly press button to awaken remote from sleep mode. Collar Tone Button - Press button to cause the collar to produce an audible tone. The tone will continue to sound as long as the button is pressed.
Warranty Registration To register your training collar for the Limited Lifetime Warranty, please visit WWW.LOBOCOMMANDER.COM and claim your FREE GIFT! lobocommander.com...
Need help?
Do you have a question about the 601TC and is the answer not in the manual?
Questions and answers