Table of Contents
Advertisement
GSM/GPRS/GPS TRACKER
USER MANUAL
Thank you for purchasing the tracker. This manual shows how to operate the device
smoothly and correctly. Make sure to read this manual carefully before using this
product. Please note that specification and information are subject to changes without
prior notice in this manual. Any change will be integrated in the latest release.
Advertisement
Table of Contents
Related Manuals for Accurate Technology TK100
Summary of Contents for Accurate Technology TK100
- Page 1 GSM/GPRS/GPS TRACKER USER MANUAL Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual.
-
Page 2: Table Of Contents
Contents ◆Quick using ........................ 3 ◆Installation attentions ....................3 Summary ......................... 4 Main functions ......................4 3 Specs........................4 4 SIM card installation ....................4 5 Power Wires connection ..................... 5 6 Device Parameter Settings ..................6 6.1 Initialization ...................... 6 6.2 Set password ..................... -
Page 3: Quick Using
◆Quick using 1）Proper insert GSM SIM card, connect to power supply 12V/24V, Must turn on small switch inside SIM card hole. 2）Put device outside, around 45-90s three lights will keep lighting on stands for device can work normally. 3） Dialing device number, it will hang up and reply tracking message with valid Long and lat to show location. -
Page 4: Summary
1 Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS. 2 Main functions · GSM quad-band frequency; · Real time tracking by SMS/GPRS; · Two-way talking function; ·... -
Page 5: Power Wires Connection
Please make sure SIM card with full balance. 4.2 Device light description Color Represents power yellow GSM signal green GPS signal Note: the three lights must be stable lighting on represent device can work normally. All lights will turn off after 5 minutes, if you call the device number, lights will wake up. -
Page 6: Device Parameter Settings
6 Device Parameter Settings 6.1 Initialization Send SMS “#begin#password#” to the tracker, it will reply “begin ok” and initialize all the settings. (Default password:123456). For example, send SMS “#begin#123456#”, If succeeded, it will... -
Page 7: Set Password
reply“begin ok”. 6.2 Set password “#password#old password#new 6.2.1Set Password: Send SMS: password#” to the unit to change the password. For Example, send SMS: “#password#123456#666888#” to device, it will reply SMS: “password OK”. 6.2.2 Make sure the new password is in 6 digits arabic numbers, or the device cannot recognize the password. -
Page 8: Auto Continuous Track
6.6 Auto continuous track 6.6.1 Unlimited time auto track: Send SMS “#at#time interval#sum#0#” to the device. For Example, send SMS: “#at#30#sum#0#” to device, 30 means 30 seconds. 6.6.2 Cancellation: Send SMS “#noat#password#” to the device. 6.7 Voice Surveillance & Two-way calling It need connect external optional siren (or car original siren wire). -
Page 9: Geo-Fence
6.8 Geo-fence Set up geo-fence for the unit to restrict its movement within a district. The device will send message to the authorized number automatically when it exceed the district. 6.8.1 When the unit stays immobile in a place, send SMS: “#stockade#password#semidiameter#”... -
Page 10: Acc On Alarm
6.10 ACC ON alarm 6.10.1 Send SMS"#ACC#ON#" to device to start illegal start alarm function, when vehicle ignition on, device will reply "ACC!! +IMEI number+Long&Lat" to the authorized number. 6.10.2 Send SMS"#ACC#OFF#" to device to close the function. 6.11 SOS alarm When connect external SOS wire, if press the SOS button 3-4 seconds, device will reply "SOS alarm! +IMEI number+Long&Lat"... -
Page 11: Power Failure Alarm
Send SMS “#supplyelec#password#” to device, it will reply “supply electricity ok”, recover circuit successfully. 6.15 Power failure alarm If device was removed from car battery, device will end SMS “cut power alert! +IMEI number+Long&Lat” to the authorized number. 6.16 Check device setting parameters Send SMS “TCP”... -
Page 12: Device Restart
Send SMS “#IP#password#ip address#port number#”. If succeeded, “set ip address and port ok” will be returned by SMS. E.g, Send SMS command “#IP# password #116.205.4.114#8169#” to the device (116.205.4.114 is IP, 8169 is port, IP is in capital) 6.18 Device restart Send SMS “#reboot#123456#”, device will reply “system will reboot…”. -
Page 13: Faults & Solution
7 Faults & Solution Faults Solution Its failed to read SIM card, need re-install SIM card; after inserting yellow light flashing SIM card, then turn on power GPS not located, check if working outside not in room; install blue light flashing place has no metal cover Lights will enter sleep after stable lighting on 5 minutes and not Three light turn off... - Page 14 Guarantee Card User Name Phone Address Model No IMEI No Purchase Date Invoice No Seller Name Address Seller Contact 1.Within warranty period, if any damage caused by the product's own quality, user can bring the purchasing invoice and warranty card to supplier to arrange repair. 2.Those machines that has refitted or added other functions by user own will not be accepted to repair.