Table of Contents
Advertisement
Home Network System
integration
If you have other devices registered to the
hub, such as cameras, sensors, and smart
plugs, you can use the handset as an
integrated part of the Home Network System.
Specifically, you can use the handset to:
– arm and disarm the alarm system
(page 39).
– receive notifications when the sensors are
triggered.
– display the status of each sensor
(page 40).
– turn smart plugs on and off (page 41).
Alarm system features
You can use the handset to arm and disarm
the alarm system. If the system's sensors are
triggered when the system is armed, such as
when motion is detected or when a door or
window is opened:
– the handset and hub sound an alert.
– the handset displays information about the
detection.
– the handset announces the detection.
(Talking notification feature; page 40)
– the hub LED indicator blinks quickly in red.
– the M
N button on the handset blinks
rapidly.
Additional features and settings are available
when using the Home Network app
(page 41).
Arming and disarming the
system
The alarm system has 3 modes.
– "At Home": Use this mode when someone
is at home.
– "Away": Use this mode when no one is at
home.
– "Disarm": Use this mode when alarm
system features are not needed.
Home Network System Integration
R The hub's LED indicator lights in red when
the arm mode is set to "At Home" or
"Away".
R Sensors can be enabled or disabled for the
arm modes. For more information, refer to
the User's Guide (page 42).
Important:
R You will be requested to enter a disarm PIN
while operating this system. We
recommend changing the PIN from the
default before operating the system
(default: "0000", page 41).
n To arm the system:
1
M
N
2
MbN: Select "At Home" or "Away". a
MOKN
R If the system is indicating that it has
been triggered (such as when the alert
is sounding), the mode cannot be
changed to "At Home" and "Away".
3
Enter the disarm PIN (default: "0000",
page 41) if prompted. a MOKN
R When you select "Away", you need to
press MOKN to activate the mode. The
hub sounds an alert for 1 minute by
*1
default
; this gives you time to leave
home before the sensors can be
triggered (Exit delay time). The
sensors will be armed when the alert
stops.
*1
This setting can be changed when using
the Home Network app. For more
information, refer to the User's Guide
(page 42).
Note:
R If the system detects that a window or door
is still open when you arm the alarm
system, the handset will notify you.
n To disarm the system:
1
M
N
2
MbN: "Disarm" a MOKN
3
Enter the disarm PIN (default: "0000",
page 41). a MOKN
Note:
R If a sensor that is configured to use entry
delay time is triggered, the system gives
39
Advertisement
Table of Contents
