Selecting The Scene Templates; Selecting The Desired Scene Template - Yamaha RX-V463 Owner's Manual

SELECTING THE SCENE TEMPLATES

This unit is equipped with 16 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button:
SCENE 1: DVD Movie Viewing
SCENE 2: Music Disc Listening
SCENE 3: TV Viewing
SCENE 4: Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE
template
SCENE template library
(Image)
Selecting the desired SCENE
template
1
Press and hold the desired QSCENE (or
5 SCENE) button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
3 seconds
1
Front panel
Flashes
DVD Movie View
28
En
Selecting the SCENE templates
1
Assign the
SCENE
template to the
SCENE button
3 seconds
1
or
Remote control
1
Press O INPUT l / h (or press 4 AMP and
2
then press 7l / h) to select the desired
template.
l
INPUT
Front panel
AMP
Remote control
DVD Viewing
Press the QSCENE (or 5 SCENE) button
3
again to confirm the selection.
The selected SCENE template is assigned to the
button.
1
Front panel
Note
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you may need to set the input
source of the SCENE template on the remote control. See page 32
for details.
h
or
ENTER
1
or
Remote control