Table of Contents
Advertisement
LED
Run
LED
Phone
LED
Battery
LED
Register
LED
Signal
(3 indicators)
LED
FAX
Back Panel
The back panel of the equipment is shown as in Figure 1-2.
a)
Power: DC12v power supply socket.
b)
Power switch: DC power switch, push down to switch on the equipment
c)
Phone: RJ11 telephone set socket, connect to telephone set by normal 6P4 phone line
d)
Program: Two RJ11, special cable for update terminal
e)
Antenna socket: for external antenna.
f)
GPRS/Internet Port
S1801 Fixed Wireless Terminal User's Manual
Green
Sparks - device under proper operation
On or Off - device failed
Green
On – telephone off hook
Off – telephone on hook
Red
On-battery is exhausted, need rechargeable
Green
Indicates connection status
Off – wireless module not started
Sparks quickly – network registration not completed
Sparks once every 4 seconds – network registration succeeded.
Green
Indicates signal intensity of the network. The more the number of
the lighted lamp, the stronger the signal intensity of the network
Flash—standby or calling, on 1 seconds, off 4 seconds.
It indicates faxing under fax mode.
Green
Flashes means transmit fax; flash speed relate to transmit speed
Figure 1-2 Back Panel
2
Advertisement
Table of Contents
