Samsung CW29M066V7XXEC Service Manual page 107

Disassembly & Reassembly
12-1-2 Disassembling the CRT and Chassis
Part Name
Chassis
① Separate the Ass'y Holder chassis from the Front Cabinet.
Holder
② Pull the Chassis Holder lifting the fixing clip up.
Notice: Pulling the Chassis Holder by force may
damage the clip or the connector.
Pull the Chassis Holder just until the clip
comes off the hole.
① Separate the Speakers, the Side AV Wire,
the Control from the Front Cabinet
② Eparate the wire from the Wire fixing holder at
Notice: Since there is a clip to connect the Connector
Header in the Wire Connector, pulling it by force
may damage the clip or the connector. Press the
clip down completely and pull the connector.
① Separate power cable from the Front Cabinet and Power
Board.
② To separate the power cord, slide the fixing clip and lift the
cable up.
① Separate the CRT Ass'y from the CRT
② Separate the TBC wire, GND, VM and Tilt cables from the
CRT Ass'y sequentially
12-2
Description
.
Description Photo
Samsung Electronics