Management; Language - Acer V9800 User Manual

Management

Choose "On" to dim the projector lamp, which will also
ECO Mode
lower the power consumption, reduce noise, and extend
the lamp life. Choose "Off" to return to the normal mode.
Test Pattern Displays the test pattern.
Choose "On" to turn on the High Altitude mode. When
this function is turned on, the projector fans operate at full
High Altitude
speed continuously to cool down the projector's
temperature.
•
Turn Off Mode
•
Auto Shutdown
The projector will automatically shut down while there is
(Minutes)
no signal input detected after the time you set.
•
Menu Display
•
Time (Seconds)
Selecting "On" enables the function. The projector will
AC Power On automatically turn on when power is supplied via the
power cord.
If turned on, the I/O port message displays on the upper
Status
right corner.
Lamp Hour Elapse Displays the lamp's elapsed operating time (in hours).
Choose this function to show or hide warning message
Lamp Reminding when the changing lamp message is displayed. The
message will show up 30 hours before end of lamp life.
Press "ENTER" after choosing "Yes" to reset the lamp hour
Lamp Hour Reset
counter to 0 hours.
Press "ENTER" after choosing "Yes" to return the display
Reset parameters on Management menu to the factory default
settings.

Language

Language
Standard: Enables you to turn off the projector with a
normal turn off process.
Instant Resume: Enables you to restart the projector
immediately within 2 minutes after turning it off.
5/15/30: Chooses the length of time the OSD menu
will remain active after your last key press.
Manual: The OSD menu remains active. The only way
to launch or exit the OSD menu is by pressing
"MENU".
Sets a language for the OSD menus. Use
select your preferred language.
23
to