Table of Contents
Advertisement
SYSTEM SET UP
11.9, set this number as the value for safety timer
setting. If the charger stopped at this threshold,
about 140% of the capacity will have been fed into
the battery.
For example:
Capacity
2000mAh
3300mAh
1000mAh
This program sets the maximum charge capacity
Capacity Cut-Off
that will be supplied to the battery during charge.
ON
5000mAH
If the deltapack voltage is not detected nor the
safety timer expired by any reason, this feature
will automatically stop the process at the selected
capacity value.
The beep sounds at every time pressing the
Key Beep
ON
buttons to confirm your action. The beep or
Buzzer
ON
melody sounded at various times during
operation to alert different mode changes.
These audible sounds can be on or off.
This program monitors the voltage of input
Input Power Low
battery. If the voltage drops below the value you
Cut-Off
11.0V
set the operation forcibly terminated to protect
the input battery.
This screen shows the external and internal
Ext. Temp
0C
Int. Temp
37C
temperature.
28
Current
Safety Time
2.0A
(2000/2.0=1000)/11.9=84 minutes
3.0A
(3300/3.0=1100)/11.9=92 minutes
1.2A
(1000/1.2=833)/11.9=70 minutes
VARIOUS INFORMATION DURING THE PROCESS
Press and hold the Start/Enter button for more than
LOAD FACTORY SET
three seconds to load the factory set.
ENTER
VERSION
This screen shows the version.
1.00
VARIOUS INFORMATION DURING THE PROCESS
You can inquire various information on LCD screen during charging or
discharging process. When you press
establishment of user settings.
And also you can monitor the voltage of individual cell by pressing
when the individual connection cable is linked to the Lithium battery being
processed.
It comes to the final voltage when the program
ended.
Present input voltage.
Ext. Temp
0C
This screen shows the internal temperature.
Int. Temp
26C
Displayed safety timer is turn on and duration of time in
minutes.
Displayed capacity cut-off function is turn on and the
setting value of capacity.
The battery is connected with balance lead, you can
4.19
4.15
4.18V
0.00
0.00
0.00V
check voltage of each cell in the battery pack.
button the charger shows the
button
29
Advertisement
Table of Contents
