Advertisement
A)(-FlGD
ADJUSTMENT PROCEDURES
I ldling Current
(1) Set the volume control to minimum during this adjustment.
(2) T\En R?51 anil R?52 fully counterclockwise before the power ie switch on.
(3) Always start fmm cold, and allow 5 minutes to warm up before adjustment.
If the hegtsink is already warm fiom previous use the conect adjustuent can not be made.
(4) Connect a DC voltmeter to R771 resietor's leads for left channel, or ta F"772 for right channel.
(5) Adjust R751 for Ieft channel, or R752 for right channel, so that the DC voltneter becomes 4.5
mV - 15mV.
1 - 1 6
Advertisement
