Advertisement
AX.FIGD
Disass embly Proced u res
(1) Removing the top cover
t. Remove 2 screws @ fastening both sides
of top cover, and 4 screws @ fastening
the rear side.
2. Remove the top cover.
f
@ x z
@ x 4
(2)
Removing the Front Panel Assembly
1. Remove the top cover.
2. Disconnect the connector PA360.
3. Pull out the Master volume knob, Tleble knob, Bass knob and Balance knob.
4. Remove the nut fastening the Master volume, Bass and Balance.
5. Disconnect the connectors (PA790,P202,P203,BC500)
6. Remove 3 screws @ and 3 hook O fastening
bottom of the front panel assembly.
%
Mastervolume konb
Bass, Treble &
Balance konb
(3)
Removing the Control PCB (ENH-272-3)
1. Remove the top cover.
2. Remove the front panel assembly.
3. Pull out the source selector knob and remove
the nut fastening the source selector.
4. Remove 8 screws @ fastening the control PCB
to remove it.
@
sDsG3008N
@
GBSG3008CC
@
SDSF2508Z
1-14
,(s
$
Advertisement
