Philips VR109/55 Service Manual page 58

www.freeservicemanuals.info
STEP START-
/LOC. ING
No. No.
[31] [30] Tension Lever Assembly
Tension Lever Sub
[32] [31]
Assembly
Reel S Assembly
[33] [31]
Reel T Assembly
[34] [29]
[35] [33] Reel Shaft
[36] [18] First Gear
[37] [36] Second Gear
[38] [37] FF Arm
[39] [37] Idler Assembly
[40] [37] BT Arm Assembly
Loading Arm T Assembly
[41] [19]
Loading Arm S Assembly
[42] [41]
Moving Guide S
[43] [2]
Preparation
Moving Guide T
[44] [2]
Preparation
[45] [2] Cleaner Lever Assembly
[46] [45] CL Post
↓ ↓
1 : Follow steps in sequence. When reassembling, follow the steps in reverse order.
These numbers are also used as Identification (location) No. of parts in the figures.
2 : Indicates the part to start disassembling with in order to disassemble the part in column (1).
3 : Name of the part
4 : Location of the part: T=Top B=Bottom R=Right L=Left
5 : Figure Number
6 : Identification of parts to be removed, unhooked, unlocked, released, unplugged, unclamped, or desoldered.
P=Spring, W=Washer, C=Cut Washer, S=Screw, *=Unhook, Unlock, Release, Unplug, or Desolder
e.g., 2(L-2) = two Locking Tabs (L-2).
7 : Adjustment Information for Installation
(+): Refer to Deck Exploded Views for lubrication.
06/28/2012
PART
Fig. No.
T DM1, DM11 *(P-7), (C-6)
T DM1, DM11
T DM1, DM11 (C-7),
T DM1, DM11 (C-8),
T DM1, DM11 2(S-19)
B DM2, DM12 (C-9)
B DM2, DM12 (C-10), (W-2)
T DM1, DM13
T DM1, DM13
B DM2, DM14
B DM2, DM14 (C-11)
B DM2, DM14
T DM1, DM15
T DM1, DM15
T DM1, DM4
T DM1, DM4
↓ ↓
2-4-2
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
Poly Slider Washer
Poly Slider Washer
↓ ↓
World of Free Manuals
INSTALLATION
ADJUSTMENT
CONDITION
(+) Refer to Alignment
Sec. Pg. 2-4-10
(+) Refer to Alignment
Sec. Pg. 2-4-10
↓
H67T0DA