To Access The Most Used Commands; Basic Configuration; Quick Wizard: Language / Time And Date - Daikin EWAQ006BAVP Installation Manual

5 Configuration
Why
If you do NOT configure the system correctly, it might NOT work as
expected. The configuration influences the following:
▪ The calculations of the software
▪ What you can see on and do with the user interface
How
You can configure the system via the user interface.
▪ First time – Quick wizard. When you turn ON the user interface
for the first time (via the indoor unit), a quick wizard starts to help
you configure the system.
▪ Afterwards. If necessary, you can make changes to the
configuration afterwards.
INFORMATION
When the installer settings are changed, the user interface
will request to confirm. When confirmed, the screen will
shortly turn OFF and "busy" will be displayed for several
seconds.
Accessing settings – Legend for tables
You can access the installer settings using two different methods.
However, NOT all settings are accessible via both methods. If so,
the corresponding table columns in this chapter are set to N/A (not
applicable).
Method
Accessing settings via the breadcrumb in the
menu structure.
Accessing settings via the code in the
overview settings.
See also:
▪ "To access the installer settings" on page 12
▪ "5.3 Menu structure: Overview installer settings" on page 16
5.1.1

To access the most used commands

To access the installer settings
1 Set the user permission level to Installer.
2 Go to [A]: > Installer settings.
To access the overview settings
1 Set the user permission level to Installer.
2 Go to [A.8]: > Installer settings > Overview settings.
To set the user permission level to Installer
1 Set the user permission level to Adv. end user.
2 Go to [6.4]: > Information > User permission level.
3 Press for more than 4 seconds.
Result: is displayed on the home pages.
4 If you do NOT press any button for more than 1 hour or press
again for more than 4 seconds, the installer permission level
switches back to End user.
To set the user permission level to Advanced end user
1 Go to the main menu or any of its submenus:
2 Press for more than 4 seconds.
Result: The user permission level switches to Adv. end user.
Additional information is displayed and "+" is added to the menu title.
The user permission level will stay in Adv. end user until set
otherwise.
To set the user permission level to End user
1 Press for more than 4 seconds.
Installation manual
12
Result: The user permission level switches to End user. The user
interface will return to the default home screen.
To modify an overview setting
Example: Modify [1‑01] from 15 to 20.
1 Go to [A.8]:
2 Go to the corresponding screen of the first part of the setting by
using the
00
04
08
0c
Confirm
3 Go to the corresponding second part of the setting by using the
00
Column in tables
04
#
08
0c
Code
Confirm
Result: The value to be modified is now highlighted.
4 Modify the value by using the
00
04
08
0c
Confirm
5 Repeat previous steps if you have to modify other settings.
6 Push
7 At installer settings menu, press
The system will restart.
Confirm
Result: The system will restart.
5.2
.
5.2.1
[A.1]
[1]
> Installer settings > Overview settings.
and button.
INFORMATION
An additional 0-digit is added to the first part of the setting
when you access the codes in the overview settings.
Example: [1‑01]: "1" will result in "01".
Overview settings
01
00 01 15 02 00 03
05 06 07
09 0a 0b
0d 0e 0f
Adjust Scroll
and button.
Overview settings
01
00 01 15 02 00 03
05 06 07
09 0a 0b
0d 0e 0f
Adjust Scroll
Overview settings
01
00 01 20 02 00 03
05 06 07
09 0a 0b
0d 0e 0f
Adjust Scroll
to confirm the modification of the parameter.
Installer settings
OK Cancel
Adjust

Basic configuration

Quick wizard: Language / time and date

# Code
N/A Language
N/A Time and date
Packaged air-cooled water chillers and packaged air to water heat
00
00
and button.
00
to confirm the settings.
Description
EWAQ+EWYQ006+008BAVP
pumps
4P478610-1 – 2017.02