EUROSTAT TOM600 User Manual page 5

By pressing key (B) „Change" it appears T= 002s and than in 1 second Steps up to10 Second.
After that the timer starts with T=010s the changing steps are now 10 Seconds up to 60 Seconds, after this
you get 60 second steps up to 240 seconds.
Press the (A) „Set-Up" key to choose the displayed timer time.
At the display appears:
By pressing key (B) „Change" the timer is switching between AVERAGE and LAPSE.
Press the (A) „Set-Up" key to choose the displayed timer mode.
Now, it is asked whether you will delete the EEPROM stored data files.
In the display appears:
By pressing key (B) „Change" the display is switching between YES and NO.
By pressing the (A) „Set-Up" key if YES is displayed, all files in the EEPROM memory will be erased.
By pressing the (A) „Set-Up" key if NO is displayed, no file will be erased, and the next file is storage by the
next free file number.
st
In the 1 line at the display appears for approximately 2 seconds:
After that it appears in the 2
3.1 Measure Voltage / Display Mode
Choice of the voltage : the tester asks to choose a voltage
"AUTOMATIQUE" mode must be preferred. The tester measure automatically under 10V, and then under
100V.
"MANUAL" mode and 10 V voltage allows you to measure resistances of 20 kilo ohms to 200 giga ohms.
For a voltage of 100V, you can measure resistances from 200 kilo ohms to 2 Tera ohms.
Now it will be ask for your choose off the measure voltage.
In the display appears :
By pressing key (B) „Change" the display is switching between AUTO (Automatic), MAN. 10V, and MAN.
100V. Press the (A) „Set-Up" key to choose the displayed voltage mode.
After that, it will be ask for your choose off the display voltage.
By pressing key (B) „Change" the display is switching between the mathematical and technical display
form. Press the (A) „Set-Up" key to choose the displayed display time.
TIMER MODE :
AVERAGE
DEL FILES ?
YES
WAIT . . .
nd
line: FILES DELETED !
VOLTAGE MODE :
AUTO
DISPLAY MODE :
R>2.0xE12Ω
Item partnumber : 61-200-0600
(LAPSE)
(NO)
(MAN.10V) (MAN. 100V)
(R>2.0 TΩ)
User manual TOM600
5