Cadillac CTS-V 2009 Owner's Manual page 243

Stopping DVD Audio Playback
Press the pushbutton located under the
stop playback of the DVD audio disc. "DVD PreStop"
r
displays. Press / j to resume playback from where it
was stopped.
Press the pushbutton located under the
again while in DVDPreStop, "DVDStop" displays.
r
Press / j while in DVDStop to begin playback
from the beginning of the DVD audio disc.
r
Press / j during DVD audio playback to pause or
resume playback.
Finding Songs on DVD Audio
TUNE/TONE: Turn this knob to display a list of all
tracks in all groups on the DVD audio disc. Stop turning
this knob or press the TUNE/TONE knob to start
playback of a particular track.
© ¨
SEEK : Press the left arrow to go to the start of
the current track, if more than five seconds have played.
Press the right arrow to go to the next track. If either
arrow is held, or pressed multiple times, the player
continues moving backward or forward through
the tracks within the current Group.
MENU/SELECT: To change Groups, press the
pushbutton located under the Menu label to display a
c (stop) label to
list of all Groups. Turn the MENU/SELECT knob to
highlight the desired Group. Press the MENU/SELECT
knob to select it. Playback begins from track 1 of
the selected Group.
Shuffle on DVD Audio
c label
Press the pushbutton located under the Shuffle label to
begin random playback of all songs in the current
Group. Press again to turn off random playback.
Selecting DVD Audio Streams
Each DVD audio Group may contain audio content that
is encoded in one or two formats. For example, a
particular Group may have both a 5.1 surround audio
stream and a 2.0 stereo audio stream available.
Press the pushbutton located under the Audio label to
display the current audio stream playing. "Audio
Stream 1" or "Audio Stream 2" briefly displays. Press
the pushbutton located under the Audio label again
to toggle between Audio Stream 1 or Audio Stream 2
(if available).
Check the DSP settings to determine if a 5.1 surround
sound Audio Stream is playing. See "Digital Signal
Processing (DSP)" earlier in this section. Press the DSP
label to see if the 5.1 + Normal or 5.1 + Rear settings
are available for selection. If these settings are available,
Audio Stream 1 is playing.
3-95