What To Do, When - AMC EasyQuick User Manual

8. What to do, when...

...EasyQuick lifts a little upwards during
the cooking process, so steam escapes
through the rim of the pot?
ƒ
A little overpressure has been built in the pot
➔Check if the steam valve is movable and clean.
➔Check if the sealing ring is properly fitted.
...food comes out through the steam
outlet of the steam valve during the
cooking process?
ƒ
The pot is possibly too full.
➔Check the volume filled in the pot. It should
not be more than 2/3 of the total capacity or in
case of foods that well ups, not more than 1/2.
...the Audiotherm cannot be initialised?
ƒ
The optic window of the Audiotherm and/or
the Visiotherm E could be dirty or have a
film of water or you are using an unsuitable
Audiotherm.
➔Clean the optic window of the Audiotherm
and/or the Visiotherm E.
➔Check if you are using the right Audiotherm:
Choose model with grey casing and black
buttons.
18
...radio contact cannot be made between
Audiotherm and Navigenio?
ƒ
Check if you have proceeded correctly:
➔Set rotary knob of Navigenio at "A".
➔Switch on Audiotherm and fit it.
➔To initialse the Audiotherm turn until the
desired symbol appears.
...the radio contact is interrupted
during automatic cooking or the symbol
"initialising" flashes?
ƒ
Navigenio flashes red and the radio symbol
cannot be seen any longer on the Audiotherm.
➔Set rotary knob on the Navigenio at "0" and
then again at "A".
➔To initialise again, turn the Audiotherm until
the desired symbol appears.
...during manual cooking, the symbol
"initialising" flashes?
ƒ
Audiotherm signalises out with a long beep.
➔To initialise again, turn the Audiotherm until
the desired symbol appears.