Diamond Multimedia VS200VR(TX) User Manual page 9

Install VS200VR(RX)
Step1:Connect the power adapter (5V, 2.5A) to RX and wall socket, press power switch to
"ON", the power LED light will turn on red.
Step 2: ConnectRX (HDMI Out) to TV by HDMI cable which comes with the package
Step 3: Wait around 50 seconds, the video will be sent from TX to RX.
How to control the device in a different room by using remote control
1. Connect the IR emitter cable with the TX IR jack, and stick the IR probe in front of the IR
sendor of the video source. (Please find the correct position of IR sensor of the video source
or the IR signal won't pass through)
2. Connect the IR receiver cable with RX IR jack, and stick the IR probe on TV2.
3. Use the source device remote control aiming at IR receiver probe to control the
source device, the distance between this IR receiver probe and remote control should
be within 5m.
8