Bticino 391 115 User Manual

Bticino 391 115 User Manual

Pal 4-camera ahd dvr, pal 8-camera ahd dvr, pal 16-camera ahd dvr
Table of Contents

Advertisement

391 115
391 116
391 117
PAL 4-camera AHD DVR
PAL 8-camera AHD DVR
PAL 16-camera AHD DVR
User manual
en

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 391 115 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bticino 391 115

  • Page 1 391 115 391 116 391 117 PAL 4-camera AHD DVR PAL 8-camera AHD DVR PAL 16-camera AHD DVR User manual...
  • Page 2: Table Of Contents

    Contents 1 Product description ..........................5 Front view ................................5 Rear view ................................6 Remote control ..............................9 2 Initial connection ........................... 10 Setup wizard ..............................10 Main menu ................................. 15 2.2.2 Configuring the display settings ......................16 2.2.3 Configuring the video settings ......................... 18 2.2.3.1 Configuring the network settings ...................
  • Page 3 4.7.4.2 Configuring port redirection (configuring NAT) ................... 56 4.7.4.3 Connection with a computer ........................58 4.7.4.4 Connecting with the “Bticino Camera Viewer” application (iOS/Android) ........59 4.7.5 Email notification ............................60 5 Other settings ............................62 General settings ............................... 62 DST (Daylight Saving Time) ..........................
  • Page 4 Contents of the kit Quantity Item Illustration 391115 / 391116 / 391117 Recorder Remote control Mouse Power supply Quick start guide Batteries Mini CD-ROM...
  • Page 5: Product Description

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Product description 1.1 Front view 391115 391116 / 391117 13 14 13 14 Number Item Functions USB socket For connecting a USB peripheral (mouse, USB key) Power-on indicator light When the green indicator light is on, the device is powered When the red indicator is on with a steady light, the recorder is recording...
  • Page 6: 1.2 Rear View

    1.2 Rear view 391115 Number Item Functions Video inputs (BNC) For connecting cameras 1 to 4 Video output (VGA) For connecting the main monitor Video output (HDMI) For connecting the main monitor Audio inputs (RCA) For connecting microphones 1 to 4 (use subject to regulations) Audio output (RCA) For connecting a loudspeaker USB sockets...
  • Page 7 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR 391116 Number Item Functions Video inputs (BNC) For connecting cameras 1 to 8 Video output (VGA) For connecting the main monitor Video output (HDMI) For connecting the main monitor Audio inputs (RCA) For connecting microphones 1 to 4 (use subject to regulations) Audio output (RCA)
  • Page 8 391117 Number Item Functions Video inputs (BNC) For connecting cameras 1 to 16 Video output (VGA) For connecting the main monitor Video output (HDMI) For connecting the main monitor Audio inputs (RCA) For connecting microphones 1 to 4 (use subject to regulations) Audio outputs (RCA) For connecting loudspeakers 1 and 2 USB socket...
  • Page 9: Remote Control

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR 1.3 Remote control 391115 / 391116 / 391117 Buttons Functions For selecting cameras 1 to 9 For toggling the video output (BNC - VGA) for the main monitor (long press) From the multi-view display: displays the main menu Menu From the menu: back to the previous menu or back to multi-view display...
  • Page 10: Initial Connection

    Initial connection Setup wizard Restart the recorder: the system restarts Once the system has started up, the setup wizard offers to configure the recorder quickly in 6 optional steps. You can go back to a previous step, or do so later via the general menu (see detailed guide). 2.1.1 Hard disk management The wizard checks the presence of the hard disk and its capacity, the overwrite mode (minimum 1 day) or when the disk...
  • Page 11 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Example: Schedule recording on camera 1 every Friday from 11:00 to 15:00. Step 1: Select “CH1” in the “Channel” dropdown menu. Step 2: Select “Normal Record“ in recording mode. Step 3: Press and hold down the left mouse button and select from 11 to 15 in the F (Friday) line.
  • Page 12: Network Configuration

    2.1.4 Network configuration Type setting Web port Media port IP address (default: 192.168.1.108) (default: 37777) Subnet mask Gateway DNS 1 (default: 8.8.8.8) DNS 2 (default: 4.4.4.4.) Step 1: Select “Static” in the “Type” line. Step 2: Enter the IP address of the recorder in the “IP Address” field. Step 3: Enter the subnet mask in the “Subnet Mask”...
  • Page 13 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Enter the addressee’s email address in the “Receiver” field. Select the minimum time between sending two emails in the “Interval” dropdown menu. Note: The SMTP settings are given by the email service provider. 2.1.6 DDNS configuration (see also Section 2.2.5 on creating a dynamic DNS account) Activate DDNS...
  • Page 14 Live multi-view display: example for a recorder with 4 cameras. “R” (red) = recording in progress “M” = movement detected (+ exit time delay) Green = movement detection not activated Red = movement detection activated (see the “alarm and movement detection” section) Double-click on one of the views to display it full screen.
  • Page 15: Main Menu

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Main menu 2.2.1 Configuring the settings Main menu Settings submenu Settings submenu Submenu directories Submenu directories...
  • Page 16: Configuring The Display Settings

    2.2.2 Configuring the display settings Live display Select the channel Channel name Position in the grid Set the image colours Show/hide the channel in the grid Show the time code in the recording Show the time code in the live view Note: Click on “Save”...
  • Page 17 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Select the camera Activate one or more privacy areas Select the privacy areas Define the privacy areas (see below) Copy the settings Channel to be copied Example of creating a privacy area: Press the “Setup”...
  • Page 18: Configuring The Video Settings

    2.2.3 Configuring the video settings Video Select the camera Activate recording Activate pre-recording (on detection/alarm) Copy the settings Channel to be copied Scheduling the recording (Default: 24 hours a day, 7 days a week: normal + movement detection) Recording mode (continuous, on detection of movement, on Day of the week Camera wired alarm).
  • Page 19 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Example: record all movement detection 24 hours a day, 7 days a week: Select using the mouse (click and drag) Recording schedule set Main stream Select the following for each camera: - Resolution of the recording (default: 720 p) - Number of images per second (default: 15 FPS for Cat.
  • Page 20: 2.2.3.1 Configuring The Network Settings

    2.2.3.1 Configuring the network settings Type setting Media port Web port (default: 37777) IP address (default: 192.168.1.108) Subnet mask Gateway DNS 1 (default: 8.8.8.8) DNS 2 (default: 4.4.4.4) Select “Static” in the “Type” line. Enter the IP address of the recorder in the “IP Address” field. Enter the subnet mask in the “Subnet Mask”...
  • Page 21 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 5: Enter the user name and password. Default: - “User Name”: 88888888 - “Password”: 88888888 - “Client Port”: 37777 Step 6: Select the stream in the “Bitrate” dropdown menu (select “Sub stream” if the network performance level is poor). Step 7: The default language is English.
  • Page 22: Local Connection (Mac Os)

    2.2.5 Local connection (Mac OS) The recorder can be accessed via the Safari web browser. Step 1: Open Safari. Step 2: Enter the recorder’s IP address in the address bar. Step 3: If the system displays a warning message asking you to install the RSVideoOcx.cab control, click on the “OK” button so that the system installs it automatically.
  • Page 23: Remote Connection

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR 2.2.6 Remote connection To connect to the recorder from a computer on the local area network, follow the instructions in Sections 4.7.1 to 4.7.3. To connect to the recorder from a computer that is not on the local area network, you must first connect to the external IP address of the router.
  • Page 24: Standard Functions

    Standard functions Configuring the settings for recordings By default, the recorder records continuously (normal) + movement detection on all connected cameras (24 hours a day, 7 days a week). 3.1.1 Configuring the settings for continuous recording Step 1: Activate/Deactivate recording Activating recording determines which cameras can be recorded (manually or scheduled).
  • Page 25 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 2-5: Select the day of the week in the left-hand column: (S=Sunday, M=Monday, T=Tuesday, W=Wednesday, T=Thursday, F=Friday, S=Saturday) Step 2-6: Set the continuous recording periods on the first line of the schedule (a green/orange/red block indicates that continuous recording/on detection of movement/on external alarm is set for the time period) Step 2-7: Copy this schedule from the selected camera to the camera(s) selected in the dropdown menu.
  • Page 26: Configuring The Manual Recording Settings

    3.1.2 Configuring the manual recording settings Manual recording is activated or deactivated using the start or stop button in each camera’s taskbar. Click on the camera’s image to display the camera’s sub-taskbar. Click on the “Video” button in the sub-taskbar to start manual recording. A red “R” (Record) confirms that recording is activated.
  • Page 27 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Select the camera Select the recording type Schedule: the days containing a recording of the selected type are marked with a coloured triangle The current day is fully coloured Channels with a recording (coloured triangle) Start playback on the...
  • Page 28 Note 1: Use the icon to select the start of a sequence (click once) and the end of a sequence (click again). A window then appears in which you can select the recording format for this sequence When you click on Save, a recording window appears, in which you can, for example, save the sequence to a USB key which has been inserted in one of the USB connectors.
  • Page 29: Exporting A Recording To A Usb Key/Hard Disk

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Click on the icon to display the corresponding sequences identified by dark lines on the recording timer. Note 3: When a single camera is selected for playback, the icon appears and can be used to zoom in on a particular area of the screen.
  • Page 30 Select the time period Select the time period Select the date Start the search Select the camera Select the recording type Step 3: Insert a USB key in one of the recorder’s USB ports. Step 4: Click in the “Date”, “Channel” and “TYPE” fields to select a time period, the cameras and the recording type to search for.
  • Page 31 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR An uploading window appears. Select the backup medium and the directory and click on “OK” Leave the recorder to carry out the export. Do not remove the USB key during the export operation. Step 8: Click on the “Cancel”...
  • Page 32: Advanced Functions

    Advanced functions Alarm and movement detection 4.1.1 Configuring the settings for recording and other actions on external alarm This function can, for example, be used to remove any doubt regarding detection of a possible intrusion by an alarm system. Step 1: Wire one alarm input and/or output Step 1-1: Switch off the recorder.
  • Page 33 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 2-4: Select the type of input contact (NO or NC) in the “IO Status” dropdown menu. Step 2-5: Define the period during which the input contact remains disabled after an alarm in the “Latch Time” dropdown menu.
  • Page 34: Configuring The Settings For Recording And Other Actions On Movement Detection

    Step 3-6: Click on “Copy” to copy the setting to one or more cameras. Step 3-7: Click on “Save” to confirm. Step 3-8: Click on the “Cancel” button or right-click to return to the main menu. Step 3-9: Right-click to exit the main menu. 4.1.2 Configuring the settings for recording and other actions on movement detection This function provides a pre-alarm or optimises the use of the hard disk, but does not replace an intrusion...
  • Page 35 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 1-8: Select which camera is to record when movement is detected by checking the corresponding box. Step 1-9: Define the recording time after movement has been detected in the “Post Recording” dropdown menu. (Note 1) Configuring a detection area - Click on “Setup”...
  • Page 36: Searching For A Recording By Event

    Recording mode (continuous, on detection of Day of the week Camera movement, on wired alarm) Daily time period Recording period and mode according to colour Copy Copy the setting from Step 2-3: Select the camera in the “Channel” dropdown menu. Step 2-4: Select the recording type “Motion Record”...
  • Page 37: Configuring The Main Stream And Sub-Stream Settings

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Select the recording type Select the camera Search Select the month Select the day on which the type of recording is identified (coloured triangle) Select a time period Start playback Configuring the main stream and sub-stream settings 4.3.1...
  • Page 38: Configuring The Substream Settings

    Mode Type Resolution (PAL) Resolution (NTSC) 720p 1280 x 720 1280 x 720 WCIF 480 x 288 480 x 240 WHD1 960H 960 x 288 960 x 240 960 x 576 960 x 480 Step 6: Click on “Save” to confirm. Step 7: Click on the “Cancel”...
  • Page 39: Dynamic Masking Areas

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 7: Click on “Save” to confirm. Step 8: Click on the “Cancel” button or right-click to return to the main menu. Step 9: Right-click to exit the main menu. Note: - These steps must be carried out camera by camera or can be copied from one camera to another by clicking on the “Copy”...
  • Page 40 When a mask is activated and “Setup” is pressed in the “Mask Area” line, this mask appears as a transparent area with a red frame and the area number. Step 8-1: To move the area, click inside the frame, hold the mouse button down and drag the area. Step 8-2: To resize the area, click on a corner of the frame, hold the mouse button down and drag the corner.
  • Page 41: Controlling A Motorised Camera

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Controlling a motorised camera 4.5.1 Wiring the RS485 control bus Step 1: With the recorder switched off, connect the RS485 link on the camera to the “+” and “-” terminals on the recorder. Step 2: Connect the video output on the camera to a video input on the recorder (see Section 1.2).
  • Page 42: Control

    Step 7: Enter the address of the camera in the “Address” data entry field. The PTZ settings (address, protocol and baudrate) of a motorised camera can vary from model to model. Refer to the motorised camera’s user manual. Step 8: Click on “Save” to confirm. Step 9: Click on the “Cancel”...
  • Page 43: Presets

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR 4.5.4 Presets Step 1: Click on the button in the motorised camera’s taskbar to go to the “PTZ” menu. Step 2: Click on the arrow to open the Preset menu. Open the Preset menu The preset extension appears on the right:...
  • Page 44: Tour

    4.5.5 Tour Once the presets have been set, the tour can be used to display them one after the other. Step 1: Click on the “Start Tour” button in the taskbar Start Tour The presets are displayed one after the other for the period defined in each preset. Step 2: Click on this button again to stop the tour.
  • Page 45: Configuring User Accounts With Rights

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR A new window appears. User name entry field Activate the password Password entry fields Apply Step 6: Enter the new administrator’s name in the “User Name” field (instead of “88888888”). Step 7: Activate password protection of the recorder menus in the “Password Enable”...
  • Page 46 Activate the user User name entry field Activate the password Password entry fields Apply Step 6: Activate the user in “User Enable” dropdown menu. Step 7: Enter the new user’s name in the “User Name” field (instead of “User1”). Step 8: Activate password protection of the recorder menus in the “Password Enable” dropdown menu. Step 9: Enter the new password in the “Password”...
  • Page 47: Network Functions

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Network functions 4.7.1 Addressing Step 1: Open the “Start” menu on a computer connected on the same network as the recorder by clicking on the button in the taskbar. Step 2: Enter “cmd”...
  • Page 48 Step 4: Select the recorder’s IP address The IP address of the box is generally that of the default gateway. The following table gives the default IP addresses of the most commonly used boxes. ISP name Default IP address Alice-Box 192.168.1.1 AOL-Box 192.168.1.1...
  • Page 49: Local Connection (Windows)

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 5: Configuring the settings Step 5-1: Click on the button in the taskbar to go to the main menu. Step 5-2: Click on the “Parameter” button then “Network” to display the “Network” menu. Step 5-3: Select “Static”...
  • Page 50 Step 5: Enter the user name and password. Default: - “User Name”: 88888888 - “Password”: 88888888 - “Client Port”: 37777 Step 6: Select the stream in the “Bitrate” dropdown menu (select “Sub stream” if the network performance level is poor). Step 7: Select the language in the “Language”...
  • Page 51: Local Connection (Mac Os)

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 10: Click on “Login” to log in. 4.7.3 Local connection (Mac OS) The recorder can be accessed via the Safari web browser. Step 1: Open Safari. Step 2: Enter the recorder’s IP address in the address bar. Step 3: If the system displays a warning message asking you to install the RSVideoOcx.cab control, click on the “OK”...
  • Page 52: Remote Connection

    Step 9: Click on “Login” to log in. 4.7.4 Remote connection To connect to the recorder from a computer on the local area network, follow the instructions in Sections 4.7.1 to 4.7.3. To connect to the recorder from a computer that is not on the local area network, you must first connect to the external IP address of the router.
  • Page 53: 4.7.4.1 Configuring A Dynamic Dns Account

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR 4.7.4.1 Configuring a dynamic DNS account This procedure is necessary if the internet service provider has not given a static public IP address. Step 1: Create a No-IP DNS account Step 1-1: Enter the following address in the web browser’s address bar: www.no-ip.com.
  • Page 54 Activation link The web browser displays the home page of the account that has been created. Step 1-10: Click on the “Add a Host” button to add a host. A new page appears. Step 1-11: Enter the name of the host, for example the name of the recorder, in the “Hostname” field. Step 1-12: Select the extension in the “Hostname”...
  • Page 55 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 1-15: Click on the “Add Host” button to confirm. The web browser displays the “Manage Hosts” page. In this page, hosts can be modified by clicking on the “Modify” link and deleted by clicking on the “Remove”...
  • Page 56: Configuring Port Redirection (Configuring Nat)

    Step 2-4: Select “Enable” in the DDNS dropdown menu. Step 2-5: Select the DNS server corresponding to the service used (No-IP) in the “Server” dropdown menu. Step 2-6: Enter the name of the host (created in step 1-7) in the “Domain” field. Step 2-7: Enter the DNS account user name (created in step 1-4) in the “User”...
  • Page 57 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Example for a Livebox play router: - Activate the UPnP IGD by checking the “UPnP IGD” box then clicking on the “Refresh” button. Activate/Deactivate UPnP IGD Refresh Method 2: Manual configuration Step 2-1: Open the router configuration menu by entering its IP address in the web browser’s address bar.
  • Page 58: 4.7.4.3 Connection With A Computer

    Example for access to two recorders connected on the same router: When two recorders are connected on the same router, you need to be able to differentiate between them by assigning them different http and media ports. A redirecting rule must therefore be created: - For recorder no.
  • Page 59: Connecting With The "Bticino Camera Viewer" Application (Ios/Android)

    16-camera PAL AHD DVR 4.7.4.4 Connecting with the “Bticino Camera Viewer” application (iOS/Android) The “Bticino Camera Viewer” application, available from the App Store, can be used to view a CCTV system locally or remotely via a 3G or Wi-Fi connection.
  • Page 60: Email Notification

    Step 3: Enter the recorder login and password. (88888888/88888888) 4.7.5 Email notification The email notification function sends an email on detection of movement, alarm, etc. Step 1: Click on the button in the taskbar to go to the main menu. Step 2: Click on the “Network”...
  • Page 61 4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Step 7: Enter the SMTP port in the “SMTP Port” field. Step 8: Enter the SMTP server in the “SMTP Server” field . Step 9: Enter the email address of the sender in the “Sender” field. Step 10: Enter the sender’s SMTP account password in the “Sender Password”...
  • Page 62: Other Settings

    Other settings General settings Setting the date Setting the time Date format Time format Choice of language Video format (default: PAL) (default: English) Remain in the menu after the last action DST (Daylight Saving Time) Activation Time difference Characterisation by date or by week Start of summertime End of summertime In the default setting, to match the European time zone, summertime starts on the last Sunday in March at 02:00 and...
  • Page 63: Synchronised Time (Ntp Network Time Protocol)

    The time on the recorder can be synchronised with external time servers. This synchronisation automatically makes the changes between summertime and wintertime (daylight saving time). Activate (by default) Time server (default: pool.ntp.org) Time zone (default: GMT+1.0) General information Name of the recorder (default: Bticino catalogue number) MAC address (default: 00-04-74-08-XX-XX)
  • Page 64: Log

    Select identifiable actions: • All types • System: start/stop • Changes of configuration • Alarms • User accounts • Recordings: search and display • Storage Search Search period...
  • Page 65: Specifications

    4-camera PAL AHD DVR 8-camera PAL AHD DVR 16-camera PAL AHD DVR Specifications Product 391115 391116 391117 Video compression H.264 Video system NTSC/PAL Operating system Linux Inputs: BNC: 4 ch Inputs: BNC: 8 ch Inputs: BNC: 16 ch Video Outputs: 1 VGA, 1 HDMI Outputs: 1 VGA, 1 HDMI Outputs: 1 VGA, 1 HDMI Inputs: RCA: 4 ch...
  • Page 66 DEFAULT RECORDER SETTINGS IP address 192.168.1.108 Client port 37777 Mobile port 37778 24 hours a day, 7 days a week NORMAL RECORDING 24 hours a day, 7 days a week MOVEMENT DETECTION 720p 12fps 1024 (4 CH) MAIN STREAM 720p 12fps 1024 (8 CH) 720p 12fps 1024 (16 CH) DNS1 8.8.8.8...

This manual is also suitable for:

391 116391 117

Table of Contents