Get Started; Charge Power; Switch The Player On Or Off; Automatic Standby And Shut-Down - Philips GOGEAR SA3ARA08 User Manual

3 Get started

Charge power

ARIAZ has a built-in battery that can be
charged through the USB port of a computer.
As shown, connect the ARIAZ to a PC by using
the USB cable.
Note
•
When you connect ARIAZ to a computer,
you are briefly prompted to select: [Charge &
transfer] or [Charge & play].
•
ARIAZ automatically applies [Charge &
transfer], if no new selection is made.
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50%
»
A flashing battery screen indicates
that the battery is low. The player
saves all settings and switches off
within 60 seconds.
25% 0%
Note
•
Rechargeable batteries have a limited number
of charge cycles. Battery life and number of
charge cycles vary by use and settings.
•
The charging animation stops and the
icon is displayed when the charging process is
completed.
To conserve battery power and increase the
play time, do the following on ARIAZ:
• Set the backlight timer to a low value
(go to > [Display settings] >
[Backlight timer]).

Switch the player on or off

Press and hold / until the ARIAZ is switched
on or off.

Automatic standby and shut-down

The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.
EN EN 11