Do you have a question about the Fidibus 21 and is the answer not in the manual?
Questions and answers
Lesley sStillwrll
March 4, 2025
I **** having a problem with my Forbes 21. It will not grind fine enough to make a good flour consistency, grinds only to slightly finer than corn meal at the lowest setting. It is also very difficult to turn the bowl to adjust…always a struggle. What can I do about this please?
1 comments:
Mr. Anderson
March 4, 2025
The fine grinding consistency of the Komo Fidibus 21 can be improved by ensuring the hopper is not overloaded and adjusting the grind setting gradually while the mill is running. To ease the adjustment of the bowl, ensure that the bowl is properly aligned with the spout and use a bowl of appropriate height to fit under the spout comfortably.
This answer is automatically generated
Lesley
March 4, 2025
Sorry my spell checker didn’t like Fidibus:(
Dale Walford
February 22, 2025
I tipped my machine over to dump and lost a spring when cleaning my PK 1. How can I replace it?
Page 29
Technical data Granary Two-chamber granary Three-chamber granary Capacity in lbs. approx. 20 approx. 30 Dimensions: height x depth x width in inch 19.9 x 5.6x 10.8 19.9 x 5.6 x 16 Housing of beechwood multiplex / Plexiglas insert / stainless steel slider 18 /10...
Need help?
Do you have a question about the Fidibus 21 and is the answer not in the manual?
Questions and answers
I **** having a problem with my Forbes 21. It will not grind fine enough to make a good flour consistency, grinds only to slightly finer than corn meal at the lowest setting. It is also very difficult to turn the bowl to adjust…always a struggle. What can I do about this please?
The fine grinding consistency of the Komo Fidibus 21 can be improved by ensuring the hopper is not overloaded and adjusting the grind setting gradually while the mill is running. To ease the adjustment of the bowl, ensure that the bowl is properly aligned with the spout and use a bowl of appropriate height to fit under the spout comfortably.
This answer is automatically generated
Sorry my spell checker didn’t like Fidibus:(
I tipped my machine over to dump and lost a spring when cleaning my PK 1. How can I replace it?