CB2 ASH Assembly Instructions

ash
BATH CABINET
Thank you for purchasing the Ash Bath Cabinet.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well
as the individual components to this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are recommended to safely assemble this product.
components
1 - top
panel
1 - side panels
(1 left, 1 right)
1 - back
panel
Made in Vietnam - r04
2 - doors
2 - adjustable
shelves
1 - leg assembly
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
assembly hardware
12 - cams 12 - cam
screws
wall mounting hardware
2 - plastic
anchors
Missing hardware?
Please call 800.606.6387 for replacements.

tools required

phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
right side
A
panel
B
left side
panel
NOTE: Do not over
tighten the cam screws
A. Insert 4 cam screws into left and right side
panels as shown. Secure, but do not over tighten,
cam screws with a phillips head screwdriver.
B. Insert 2 cams into left and right side panels as
shown. Make sure arrows on cams point towards
1
nearest edge with holes.
8 - shelf
supports
2 - screws
NOTE: Make sure arrows
on cams point towards
nearest edge with holes
Page 1 of 4