MSI X299 GAMING M7 ACK User Manual page 31

DIMMA1
DIMMB1
DIMMA1
DIMMB1
Important
Always insert a memory module in the DIMMC1 slot first.
y
To ensure system stability for Dual/ Triple/ Quad channel mode, memory modules
y
must be of the same type, number and density. And for every channel, the odd number
DIMM slot must to be installed first.
Due to chipset resource usage, the available capacity of memory will be a little less
y
than the amount of installed.
Based on Intel CPU specification, the Memory DIMM voltage below 1.35V is
y
suggested to protect the CPU.
Please note that the maximum capacity of addressable memory is 4GB or less
y
for 32-bit Windows OS due to the memory address limitation. Therefore, we
recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
Some memory may operate at a lower frequency than the marked value when
y
overclocking due to the memory frequency operates dependent on its Serial Presence
Detect (SPD).
It is recommended to use a more efficient memory cooling system for full DIMMs
y
installation or overclocking.
The stability and compatibility of installed memory modules depend on installed CPU
y
and devices when overclocking.
DIMMD1
DIMMC1
DIMMC1
DIMMA2
DIMMA1
DIMMB1
DIMMC2
DIMMA2
DIMMA1
DIMMB2
DIMMB1
DIMMC2
Overview of Components
DIMMD1
DIMMC1
DIMMD1
DIMMD2
DIMMC1
31