Advertisement
User Guide
on the speaker outputs, the speakers will be disconnected before
any damage can occur. If this occurs, consult a dealer.
Technical Specification
Dimensions:
Weight:
Cooling:
Power output:
at onset of clipping
Max. Output voltage:
Damping factor:
Output impedance:
Input impedance:
Input sensitivity:
Frequency response:
Hum and noise:
Channel separation:
Harmonic Distortion:
Intermodulation Distortion: 0.1% at 90Watts into 4W
Slew rate:
Thermal shutdown:
Power requirement:
Fuse:
Connections:
Mains:
Input:
Output:
The MA200 complies with:
EN60065 (Electrical Safety),
EN55103 (Electromagnetic Compatibility) and
EN61000-3-2 (mains harmonic currents)
© N.J.D. Electronics 1997
19"×3½"(2U)×10" (483×88×254mm)
6.9kg
convection
120W RMS into 4W
90W RMS into 8W
50W RMS into 16W
96V peak-peak.
360 at 100Hz into 4W.
0.025W
10kW
775mV (0dBm) for 400W into 4W
15Hz to 30kHz ±3dB
-93dB
90dB
0.1% at 90Watts into 4W
at 50Hz and 5kHz
20V/µs
at 100°C power transistor temperature
230V AC 50/60Hz 800VA
T2A HBC 5×20mm to IEC127
(2 Amp ANTI-SURGE 5×20mm )
IEC inlet connector
¼" jacks
SPEAKON™ connectors.
1/+ signal
1/- ground
Standards
MA200
-Page 7-
Advertisement
