Getting To Know Your Can Opener; Before Using For The First Time; Assembly Instructions - Bella KITCHEN SMITH 12033 Instruction Manual

Getting To Know Your Can Opener

Product may vary slightly from illustration
Figure 1
On/Off button
Blade Bracket
Magnet
Blade
Drive wheel
Bottle opener
Front housing

Before Using for the First Time

1. Carefully unpack the can opener and remove all packaging materials. Check the contents to ensure
that all parts are present, and have been received in good condition.
2. Handle the cutting lever with care. The cutting blade is sharp.
3. Wash the cutting lever in soapy water before first use. Rinse and dry thoroughly.
4. The motor base may be wiped with a damp cloth.

Assembly Instructions

1. Attach cutting lever to the can opener by aligning the key tabs with the key slots. Push the cutting
lever in. (see Fig. 2).
2. Press the lever down to ensure the lever has been properly assembled (see Fig. 3).
SO-313505_12033_Kitchen smith_Can Opener_Target_IM r2.indd 5
Figure 2
Figure 3
5
Back Housing
Knife sharpener
Cord storage
2017-04-19 12:20 PM