Screen Setup For Pc Mode - LG 20LS7D Owner's Manual

Screen Setup for PC mode

Overview
When the RGB input of the set is connected to a PC output, select
the RGB-PC as the main input mode.
When HDMI connect to PC output and select HDMI/DVI input, this
function is used.
After connecting RGB-PC or HDMI/DVI to PC ouput and checking
the screen quality.
When you change the resolution, select the proper resolution in pre-
sent input to see the best picture appearance.
Adjustment for screen Resolution, Position, Size,
and Phase
Press the ADJUST button and then use
1
select Resolution, Position, Size, or Phase.
Press the ENTER button and then use
2
make appropriate adjustments.
The Phase adjustment range is -16
■
In HDMI/DVI-PC mode, Phase is not available.
The Size adjustment range is -30
■
In HDMI/DVI-PC mode, Size is not available.
Press the ENTER button.
3
Initializing (Reset to original factory values)
To initialize the adjusted values
Press the ADJUST button and then use
1
select Reset.
Press the ENTER button and then use
2
select Y e s.
3
Press the ENTER button.
or button to
D E
button to
D E E F F G
+16.
~
+30.
~
or button to
D E
F or G button to
CC
MENU ADJUST
ENTER
Resolution
1024 x 768
1280 x 768
Position
1360 x 768
Size
1366 x 768
Phase
Reset
F
MENU Close
Resolution This function allows you select
resolution of XGA/WXGA.
Position This function is to adjust picture to
left/right and up/down as you prefer.
Size This function is to minimize any ver-
tical bars or stripes visible on the
screen background. And the hori-
zontal screen size will also change.
Phase
This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters.
Resolution
Position
Size
Initialize Settings
Phase
Yes
Reset
D
F
MENU Close
E
EXIT
D
Ok
G Move
E
1 2 3
No
G Move
Ok
1 2 3
27