Audiovox GMRS7015RC Owner's Manual page 10

GMRS7015RC OPERATIONAL MODES
SCANNER BAND
MEMORY CHANNEL
SELECT
NOTE: 1. To switch between GMRS/FRS
and SCANNER mode, press
and hold the MOSE/SCANNER
button for 2 seconds. Refer to
the appropriate section of this
manual for detailed operating
instructions for each mode.
2. To enter the VOX mode, press
and hold the VOX button for 1
second.
Controls:
LED Flashlight Button (16)
Press this button on the right side of the Transceiver to light the white LED
(15) on top of the unit, thereby activating the built-in flashlight function.
Power On-Off/SCAN Button (13)
Press and hold the power on/off button (
a dual beep to indicate the unit is on. Press the on/off button again for 2
seconds to turn the unit off. When the unit is on and the button is pres-
sed momentarily, the scan mode is enabled or disabled; when enabled,
the scan icon (SCAN) appears on the display.
Adjusting the Volume (10, 11)
With the unit powered on, press the Up Channel/Volume button (
increase volume and the Down Channel/Volume button (
10
GMRS/FRS BAND
CHANNEL
SELECT
CTCSS
SELECT
POWER (GMRS Channels
SELECT Only)
VOX LEVEL
SELECT
DUAL
WATCH
BUTTON
BEEP
ROGER
BEEP
CALL
SELECT
) for 2 seconds. You will hear
s
) to decrease
128-7961
10 of 28
) to