Advertisement
to receive French bread, but also pieces of toast or other bread slices if their
thickness and their length are shorter than the slot.
• Press down the bread carriage handle until it stops (in the same time, the grid
inside the slot will tighten around the bread in order to keep it away from the
heating wires). Then release the pressure and the handle will stay in the lower
position, which means that the heating process has begun. If the handle comes
up immediately, check if the appliance is plugged in as it blocks when the unit
is plugged in.
• You can adjust the browning intensity to obtain a more or less toasted bread by
positioning the browning control selector to one of the degrees marked from 1
to 6. Therefore you only have to turn clockwise to increase the intensity, and
anticlockwise to decrease it. The higher the number is, the more toasted the
bread will be.
• During the functioning, if you think that the bread is toasted enough or for
another reason, you can break the heating process, simply by pressing the
cancel button.
• Always unplug the appliance after use and let it cool down before handling or
storing it.
• Before attempting any cleaning operation, make sure the toaster is unplugged
from the supply socket and fully cooled down.
• To remove bread crumbs slide the crumb tray situated on the side of the
appliance.
• Never use sharp objects to clean. Doing so could damage the appliance.
• To clean the exterior surfaces, simply wipe over with a soft damp cloth.
• All other maintenance and repair should be performed by a qualified technician.
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place.
MAINTENANCE AND CLEANING
STORAGE
5
Advertisement
