recke TVD32A1000T2 User Manual page 32

Menu system instruction
Sound
Balance
If the volumes of the left speaker and the right speaker are not the same, you can adjust
the "Balance" to suit your personal preference.
1. Press / key to select "Balance" option.
2. Press / key to decrease or increase the value of the item.
Surround Sound
This is used to turn on surround sound to gain better sound effect.
1. Press / key to select "Surround sound" option.
2. Press / key to select "Surround" or "Off".
HDMI Sound
This option is only used in HDMI mode.
1. Press / key to select "HDMI Sound" option.
2. Press / key to select HDMI Sound mode, HDMI or PC.
Auto Volume
Each broadcasting station has its own signal conditions, and it is inconvenient to adjust
the volume every time the channel is changed. "Auto Volume" automatically adjusts the
volume of the desired channel by lowering the sound output when the modulation signal
is high or by raising the sound output when the modulation signal is low.
1. Press / key to select "Auto Volume" option.
2. Press / key to select "On" or "Off".
SPDIF Mode
This is used to select "SPDIF Mode" .This option is only used in HDMI/DTV mode.
1. Press / key to select "SPDIF Mode" option.
2. Press / key to select "RAW" or "PCM".
30