Table of Contents
Advertisement
External Connection
Stand and wall-mounted
Securing the TV Stand
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular,
ensure your children do not hang over or destabilize the TV; doing so may cause the TV
to tip over, causing serious injuries or death. Follow all safety precautions
this manual.
For added stability, install the anti-fall device for safety purposes as follows.
ALTERNATIVELY
To secure the TV to the table:
1- Remove the screws from the center back of the stand, put the screws into the clamps,
and then fasten the screws onto the stand again.
2- Assemble the stand to the TV.
3 - Put the screws into the clamps and firmly fasten them on the table. Confirm that the
screws have been firmly installed on the table.
Figure1
Note: The illustrations above are for explanation purposes and may vary slightly from
actual product.
B- ST4*30
Screw
(B-ST4*30)
M4*12
8
at the start of
Screw
(B-ST4*14)
Figure2
B-ST4*14
Advertisement
Table of Contents
