Sharp AQUOS LE580X Series Operation Manual

Led backlight tv

Hide thumbs

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

Table of Contents

Quick Links

Please choose your favorite page from the content.

If you want to close the operation manual, press the EXIT

button.

Also, if you want to return to the previously displayed page,

(Back) button.

press the

LED BACKLIGHT TV

OPERATION MANUAL

Table of Contents

Troubleshooting

Summary of Contents for Sharp AQUOS LE580X Series

Page 1 >> LED BACKLIGHT TV OPERATION MANUAL Please choose your favorite page from the content. If you want to close the operation manual, press the EXIT button. Also, if you want to return to the previously displayed page, (Back) button. press the ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 2: Table Of Contents
<< Contents >> 1. Part Names 6. Enjoying Photo/Music/Video Playback 10. Appendix 1-1. TV 6-1. Preparation 10-1. Troubleshooting 1-4. Remote Control Unit 6-3. Selecting the Folders to Play Back 10-3. Troubleshooting - Error Message 6-6. Playing Back Files on a USB Memory 10-4. Information on the Software License 2. How to select the TV Mode Device/SD Memory Card/Home Network for This Product 2-1. Using the Remote Control Unit Server 2-2. HOME screen 6-15. Playing Back Files from a Portable 11. Trademarks 2-4. Settings Device 12. Specifications Google Cast™ devices 12-1. TV 2-5. Devices 7. Using LINK Operation 12-3. Wireless LAN 2-8. TV Setup 7-1. Controlling HDMI Equipment Using LINK Operation 13. Dimensional Drawings 3. TV Setup Operation 13-1. LC-45LE580X 3-1. Introduction 8. Using a PC 3-2. Picture 8-1. Setting Audio Input 13-2. LC-50LE580X 13-3. LC-60LE580X 3-18. Audio...
Page 3 << IMPORTANT INFORMATION >> EN Important1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 4 << IMPORTANT INFORMATION >> EN Important2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 5: Part Names
<< Part Names >> (Front) (Side) *1 See page 3-3. The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. The drawings used throughout this manual are based on the LC-50LE580X model. EN 1-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 6 << Part Names >> TV (Continue) (Rear) LC-45LE580X *1 See the Setup Guide. And see page 7-1 for external equipment connection. *2 See page 8-1 for details on the Audio Select function. *3 Use HDMI IN 1 to connect ARC- compatible equipment. EN 1-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 7 << Part Names >> TV (Continue) (Rear) LC-50/60LE580X *1 See the Setup Guide. And see page 7-1 for external equipment connection. *2 See page 8-1 for details on the Audio Select function. *3 Use HDMI IN 1 to connect ARC- compatible equipment. *4 This function applicable for certain countries only. EN 1-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 8: Remote Control Unit
<< Part Names >> 1 POWER: Switch the TV power on or enter standby. Remote Control Unit 2 External equipment operational buttons: Operate the external equipment. 3 OPC: To switch the optical picture control on and off. (See page 3-3.) 4 TV: Press to access analogue and digital TV mode. 5 0-9: Set the channel. (See page 5-1.) 6 (FLASHBACK): Return to the previous channels, HDMI IN 1 through 4, or video input mode. (See page 5-4.) 7 NETFLIX: Display the NETFLIX screen. If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is diplayed. (See page 5-10.) 8 DEVICES:Display the Devices screen. Select a TV input source. (See pages 2-5 to 2-7.) 9 / / / , (ENTER): Select a desired item on the screen. 10 (Back): Return to the previous screen. 11 MUTE: Mute the sound. (See page 5-3.) 12 VOL+/-: Set the volume. (See page 5-2.) 13 R, G, Y, B: The coloured buttons are correspondingly used to select the coloured items on the screen. 14 AV MODE: Select an audio or video setting. (See page 3-2.) 15 VIEW: Select the screen size. (See pages 5-7 to 5-9.) 16 MANUAL: Display the operation manual. 17 EQ: Select the sound quality. (See page 3-20.) EN 1-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 9 << Part Names >> 18 Buttons for useful operations Remote Control Unit (Continue) (Reveal hidden teletext) Display hidden characters. (Hold) Stop updating teletext pages automatically or release the hold mode. (Top/Bottom/Full) Set the area of magnification. (Subpage) Display the teletext subpage directly. (Teletext) Select the teletext mode. (Subtitle) Switch subtitle languages on / off. 19 EXIT: Turn off the menu screen and application. 20 TV SETUP: Display the TV Setup screen. (See pages 2-8 to 2-9.) 21 (HOME): Display the HOME screen. (See pages 2-1 to 2-3.) 22 EPG: DTV: Display the EPG screen. 23 CH / : Select the channel. (See page 5-1.) 24 SLEEP: Set the sleep timer. (See page 5-6.) 25 AUDIO: Selects the audio mode during multichannel audio broadcasts. (See page 5-5.) 26 DISPLAY: Display the channel information. 27 INFO DTV: Display the programme information. EN 1-5 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 10: How To Select The Tv Mode
<< How to select the TV Mode >> Using the Remote Control Unit The main TV modes can be displayed by pressing the DEVICES, and TV SETUP buttons on the remote control unit. HOME screen Press (HOME) to display the HOME screen. Example Devices Press DEVICES again to display the Devices full screen. Press DEVICES to display the Devices peek screen. See pages 2-5 to 2-7 and 4-1 to 4-4 for details of Devices. TV Setup Press TV SETUP again to display the TV Setup full screen. Press TV SETUP to display the TV Setup peek screen. See pages 2-8 to 2-9 and 3-1 to 3-45 for details of TV Setup. EN 2-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 11: Home Screen
<< How to select the TV Mode >> HOME screen To display the HOME screen, press the (HOME) button on the remote control unit. Example Start a Search. The recommended contents will be displayed. The icons for applications installed on the TV are shown here. Also shown here is an icon for the built-in operation manual. Added applications are displayed here. EN 2-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 12 << How to select the TV Mode >> HOME screen (Continue) Example Switch the input. Various Android™ settings can be configured here. For details on the settings, see the next explanation. The network connection status is displayed. Wireless connection: Ethernet connection: No connection: EN 2-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 13: Settings
<< How to select the TV Mode >> Settings Date & time: Set the date and time. Language: You can select a language. Select from among 11 languages. Various Android settings can be configured from Settings on the HOME (English (UK), English (US), French, Portuguese, Simplified Chinese, Indonesian, Thai, Vietnamese, Arabic, Russian and Persian) screen. The follow settings can be configured. Key board: Switch the keyboard setting. Preferenc e Home s c reen: Home screen customise settings. Searc h: Switch the Search function setting. Speec h: Switch the Voice search setting. Acc es s ibility : Configure Caption, Talkback, and SwitchAccess settings. Some of the Caption settings may not be applied. Remote & Add ac c es s ory : Pair a Bluetooth device. ac c es s ories Loc ation: Configure the location settings. Pers onal Sec urity & Res tric tions : Configure the security and restriction settings.
Page 14: Devices
<< How to select the TV Mode >> Devices Full screen view Switching between connected devices is possible on the Devices full screen. 1. Press / / / to select the input source, and then press (ENTER). 2. Press / to select the "Switch to Device", and the press (ENTER). An image from the selected source automatically displays. If the target input is not connected, you will be able to switch to the input, but the correct video and audio will not be output. Be sure to connect the equipment beforehand. NOTE To display the Devices in the full screen or as a peek screen, see page 2-1. Changing from a full screen view to another mode is possible. EN 2-5 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 15 << How to select the TV Mode >> Devices (Continue) Peek screen view The most commonly used input devices can be shown on the Devices peek screen. EN 2-6 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 16 << How to select the TV Mode >> Devices (Continue) Peek screen configuration It is possible to configure which input devices to display on the peek screen. Six devices are set by default. To add a different device, first delete a current device, and then add the device. 1 Select the device in Devices full screen and open the Devices menu. 2 Set "Show in Peek" to "Yes". EN 2-7 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 17: Tv Setup
<< How to select the TV Mode >> TV Setup Full screen view All menus for Picture, Audio, and General can be configured on the TV Setup full screen. Item displayed in red This indicates the item currently selected. Press (ENTER) to go to the adjustment screen for this item. This indicates the current setting for the item. EN 2-8 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 18 << How to select the TV Mode >> TV Setup (Continue) Peek screen view The AV Mode, View Mode, Surround, and Equalizer menus can be configured on the TV Setup peek screen. See pages 3-2, 3-20, 3-21, and 5-7 for details on the settings for each menu. NOTE To display the TV Setup in the full screen or as a peek screen, see page 2-1. Changing from a full screen view to another mode is possible. EN 2-9 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 19: Tv Setup Operation
<< TV Setup Operation >> Introduction About Menu Items Some menu items may not be displayed depending on the selected input source. NOTE The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from the actual screens. The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of the items on the screen. EN 3-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 20: Picture
<< TV Setup Operation >> Picture NOTE Example When you play games, "GAME" is AV Mode (Changing Pic.Quality) recommended for AV MODE. AV MODE gives you several viewing options to You can select AV MODE by pressing AV choose from to best match the surrounding MODE on the remote control unit. environment of the TV, which can vary due to factors like room brightness, type of program watched or the type of device connected. These settings will be automatically saved on each input for convenience. STANDARD: For a highly defined image in a normal lighting. MOVIE: For a movie. GAME: Lowers image brightness for easier viewing. DYNAMIC:For a clear-cut image emphasizing high contrast, useful for sports viewing. DYNAMIC (Fixed): Changes the image and sound settings to the factory preset values. No adjustments are allowed. PC: For PC. EN 3-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 21 << TV Setup Operation >> Picture (Continue) Example OPC (Light Sensor) Automatically adjusts the brightness of the screen. Off: The brightness is fixed at the value set in "Backlight". On: Automatically adjusts. NOTE When set to "On", the Light Sensor senses the surrounding light and automatically adjusts the backlight brightness. Make sure nothing obstructs the Light Sensor, which could affect its ability to sense surrounding light. EN 3-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 22 << TV Setup Operation >> Picture (Continue) Example Backlight Adjusts the picture to your preference with the following picture settings. Selected button button item Backlight The screen The screen dims brightens For resetting all Picture adjustment items to the factory preset values, press / to select "Reset Picture", press (ENTER), press / to select "Yes", and then press (ENTER) NOTE "Backlight" is not available when you set "OPC" (Light Sensor) to "On". EN 3-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 23 << TV Setup Operation >> Picture (Continue) Example Contrast Adjusts the picture to your preference with the following picture settings. Selected button button item Contrast For less For more contrast contrast For resetting all Picture adjustment items to the factory preset values, press / to select "Reset Picture", press (ENTER), press / to select "Yes", and then press (ENTER) EN 3-5 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 24 << TV Setup Operation >> Picture (Continue) Example Brightness Adjusts the picture to your preference with the following picture settings. Selected button button item Brightness For less For more brightness brightness For resetting all Picture adjustment items to the factory preset values, press / to select "Reset Picture", press (ENTER), press / to select "Yes", and then press (ENTER) EN 3-6 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 25 << TV Setup Operation >> Picture (Continue) Example Colour Adjusts the picture to your preference with the following picture settings. Selected button button item Colour For less colour For more colour intensity intensity For resetting all Picture adjustment items to the factory preset values, press / to select "Reset Picture", press (ENTER), press / to select "Yes", and then press (ENTER) EN 3-7 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 26 << TV Setup Operation >> Picture (Continue) Example Tint Adjusts the picture to your preference with the following picture settings. Selected button button item Tint Skin tones Skin tones become reddish become greenish For resetting all Picture adjustment items to the factory preset values, press / to select "Reset Picture", press (ENTER), press / to select "Yes", and then press (ENTER) EN 3-8 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 27 << TV Setup Operation >> Picture (Continue) Example Sharpness Adjusts the picture to your preference with the following picture settings. Selected button button item Sharpness For less For more sharpness sharpness For resetting all Picture adjustment items to the factory preset values, press / to select "Reset Picture", press (ENTER), press / to select "Yes", and then press (ENTER) EN 3-9 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 28 << TV Setup Operation >> Picture (Continue) Example Advanced C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting. C.M.S.-hue: This is a standard to adjust the colour either more reddish or more bluish in tone. A lower value makes the image darker. NOTE For resetting all adjustment items to the factory preset values, press / to select "Reset Picture", and then press (ENTER). EN 3-10 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 29 << TV Setup Operation >> Picture (Continue) Example Advanced C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting. C.M.S.-saturation: Increases or decreases the saturation of a selected colour. A lower value makes the image darker. NOTE For resetting all adjustment items to the factory preset values, press / to select "Reset Picture", and then press (ENTER). EN 3-11 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 30 << TV Setup Operation >> Picture (Continue) Example Advanced C.M.S. (Colour Management System) Colour tone is managed using the six-colour adjustment setting. C.M.S.-value: A higher value makes the image brighter. A lower value makes the image darker. NOTE For resetting all adjustment items to the factory preset values, press / to select "Reset Picture", and then press (ENTER). EN 3-12 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 31 << TV Setup Operation >> Picture (Continue) Example Advanced Colour temp. (Colour Temperature) For a better white balance, use colour temperature correction. White with bluish tone High: Mid-High: Middle: Mid-Low: White with reddish tone Low: NOTE For resetting all adjustment items to the factory preset values, press / to select "Reset Picture", and then press (ENTER). EN 3-13 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 32 << TV Setup Operation >> Picture (Continue) Example Advanced Gamma Adjustment Adjusts the differences of picture tones between bright parts and dark parts. The adjustment range of the gamma can be set to a maximum of +3 and a minimum of -3 by pressing or . EN 3-14 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 33 << TV Setup Operation >> Picture (Continue) Example Advanced Digital Noise Reduction Produces a clearer video image. Auto: Automatically adjusts the level of noise reduction. High/Middle/Low: You can select a desired level for viewing a clearer video image. Off: No adjustment. NOTE "Digital Noise Reduction" is not available when PC format is being input. EN 3-15 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 34 << TV Setup Operation >> Picture (Continue) Example Advanced Active Contrast Automatically adjusts the image contrast according to the scene. Advanced: Produces higher contrast image in any scene. Standard: Produces high contrast image in bright scene. Off: No adjustment. EN 3-16 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 35 << TV Setup Operation >> Picture (Continue) Example Reset Picture Returns Picture Settings to their factory preset values. To reset, select "YES" and then press (ENTER). EN 3-17 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 36: Audio
<< TV Setup Operation >> Audio Example Auto Volume Different sound sources sometimes do not have the same loudness level, such as a programme and its commercial breaks, The Automatic Volume Control(Auto Volume) reduces this problem by equalizing. ON: Reduces the loudness gaps among different sound source. The result is automatically adjusted according to the sound sources. OFF: No adjustment. NOTE The Audio menu is grayed out when "Output Select" is set to "Variable". (See page 4-2.) EN 3-18 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 37 << TV Setup Operation >> Audio (Continue) Example Balance You can adjust the sound quality to your preference with the following settings. Selected button button item Balance Decrease audio Decrease audio from the right from the left speaker speaker NOTE The Audio menu is grayed out when "Output Select" is set to "Variable". (See page 4-2.) For resetting Audio adjustment items to the factory preset values, press / to select "Reset Audio", press (ENTER), press / to select "Yes", and then press (ENTER). EN 3-19 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 38 << TV Setup Operation >> Audio (Continue) Example Equalizer This function allows you to change the sound quality. Select from the following available settings. Rock/Pop/Live/Dance/Techno/Classic/Soft/Off NOTE The Audio menu is grayed out when "Output Select" is set to "Variable". (See page 4-2.) EN 3-20 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 39 << TV Setup Operation >> Audio (Continue) Example Surround The surround function produces Surround effect from the speakers. NOTE The Audio menu is grayed out when "Output Select" is set to "Variable". (See page 4-2.) For some discs, setup may be required on your BD/DVD player. In this case, please refer to the operation manual of your BD/DVD player. EN 3-21 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 40 << TV Setup Operation >> Audio (Continue) Example Bass enhancer This function improves the sound quality. The low range will be extended and the sounds in the medium and high ranges, which have been lost due to the data being compressed, will be restored. NOTE The Audio menu is grayed out when "Output Select" is set to "Variable". (See page 4-2.) EN 3-22 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 41 << TV Setup Operation >> Audio (Continue) Example Wall Mount Setup This selects the optimal audio for the programme you are currently watching even when the TV is mounted to a wall. EN 3-23 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 42 << TV Setup Operation >> Audio (Continue) Example Audio Description Setting (DTV only) This function allows you to enable output of audio description if the TV receives a signal including audio description. NOTE The audio description sound is superimposed on the main audio when you select a broadcast compatible with audio description. This function is available only for DTV broadcasts. This “Audio Description Setting” menu is not displayed for the ATV or the external inputs. The audio description sound is superimposed on the main audio only when the sound is output on the speaker sound output, headphone sound output and sound for audio out output. The sound is not output on the digital audio output and the HDMI sound output. This function is not available for the AQUOS Audio speaker system. This function does not work during USB- recording playback. EN 3-24 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 43 << TV Setup Operation >> Audio (Continue) Example Reset Audio Returns Audio Settings to their factory preset values. To reset, select "YES" and then press (ENTER). NOTE The Audio menu is grayed out when "Output Select" is set to "Variable". (See page 4-2.) EN 3-25 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 44: General
11 Starting Channel Search. Go to "General" > "Channel Search". x Press / to select the desired language, and then press (ENTER). 3 Press / to select your Wi-Fi network. 4 Press / to view Google Terms of Service and Google Privacy x Policy. 5 Press "YES" or "NO" to allow Google use your device location. 6 Press "YES" or "NO" to set permission for Google to use your TV diagnosis and usage data. 7 Press / to view Sharp Terms of Use and Sharp Privacy Policy. EN 3-26 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 45 << TV Setup Operation >> General (Continue) Example Channel Setting Programme Setup You can run the auto search procedure again at any time by accessing the “Setup” menu and “Programme setup”. Channels can be tuned automatically or manually. Digital setting (DTV only) You can reconfigure the DTV channel settings automatically or manually. Manual search Add new services within a specified frequency band. Enter the frequency using / buttons. Channel Skip You can select the channels to skip. Analogue setting You can reconfigure the TV channel settings automatically or manually. NOTE The “Analogue setting” menu is available only for watching TV in ATV mode. EN 3-27 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 46 << TV Setup Operation >> General (Continue) Example Channel Setting Antenna setup-DIGITAL If you install a DTV antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen. EN 3-28 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 47 << TV Setup Operation >> General (Continue) Example Individual Setting Parental Control (DTV only) Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not first configure your secret number.(Default: 1234) Rating (Singapore) General (G): Suitable for all ages. Parental Guidance (PG): Suitable for all, but parents should guide their young. Parental Guidance 13 (PG13): Suitable for persons ages 13 and above but parental guidance is advised for children below 13. No Children Under 16 (NC16): Suitable for persons aged 16 and above. Mature (M18): Suitable for persons aged 18 and above. Res tricted 21 (R21): Restricted to persons aged 21 and above. Rating (Other) This is used in countries other than Singapore. EN 3-29 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 48 << TV Setup Operation >> General (Continue) Example Individual Setting Download Setting Searching for updates The TV automatically determines whether a new software version is available when the TV is in standby mode. Item Automatically searches for new software updates available when the TV is in standby mode. Does not search for update information. EN 3-30 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 49 << TV Setup Operation >> General (Continue) Example Individual Setting Text Language If Teletext information does not display correctly, perform the procedure below. Select from among six kinds of language tables: West Europe, East Europe, Greek/Turkish, Cyrillic, Arabic and Farsi. Each table is compatible with the Teletext languages listed below. West Europe — English, French, Scandinavian, Turkish, German, Spanish, Italian East Europe — Polish, French, Scandinavian, Czech, German, Slovenian/Croatian, Italian, Rumanian Greek/Turkish — English, French, Scandinavian, Turkish, German, Spanish, Italian, Greek Cyrillic — English, Russian, Estonian, Czech, German, Slovenian/Croatian, Ukrainian, Lettish Arabic — English, French, Scandinavian, Turkish, German, Hebrew, Italian, Arabic Farsi — English, French, Scandinavian, Turkish, German, Hebrew, Italian, Farsi NOTE Teletext can be displayed only when it is sent by a network. Not used to convert between languages. EN 3-31 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 50 << TV Setup Operation >> General (Continue) Example Individual Setting Initial Teletext Page (DTV only) If you set the language of the initial page (this page is displayed for the first time after pressing ) for teletext in DTV mode, it will start from the selected language page. NOTE This function is available for teletext in DTV mode. This is not available for teletext in ATV or external input mode. If the initial teletext page of the selected language in this function is not included in a received broadcast, the default initial page will be displayed. EN 3-32 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 51 << TV Setup Operation >> General (Continue) Example Individual Setting Digital Audio Language (DTV only) Switching the multi audio languages Set up to two preferred multi audio languages to display if the audio languages are available. Each time you press AUDIO on the remote control unit, the audio language switches. NOTE This function depends on audio language information from broadcasters. If audio for the selected language is not included in a received broadcast, audio will not be output for that language. EN 3-33 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 52 << TV Setup Operation >> General (Continue) Example Individual Setting Subtitle (DTV only) Set up to two preferred subtitle languages (including subtitles for the hearing impaired) to display if subtitles are available. Selectable items 1st language 2nd language For Hearing Impaired Switching subtitle languages Each time you press on the remote control unit, the subtitle switches. Set “ For Hearing Impaired” to “ Yes” Subtitles for the hearing impaired have priority over each of the subtitle language settings (e.g., “1st language”, “2nd language”, etc.). NOTE Subtitles will not be displayed when the programme does not contain subtitle information. EN 3-34 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 53 << TV Setup Operation >> General (Continue) Example AQUOS Remote Control Set this function when operating the TV from equipment connected by LAN or wireless LAN. (See page 8-2.) EN 3-35 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 54 << TV Setup Operation >> General (Continue) Example No signal off When this function is enabled, the TV automatically shuts down if no signal is received for more than 15 minutes. NOTE When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. When a TV programme finishes, this function may not operate. EN 3-36 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 55 << TV Setup Operation >> General (Continue) Example Advanced Secret No. Allows you to use a secret number to protect certain settings from being accidentally changed. Input Secret No.: Input the Secret No. currently set. (Default: 1234) Setting Secret No. You can set and change the secret number by using 0-9. Yes: Change or sets the Secret No. No: The previous screen will be displayed. NOTE As a precautionary measure, make a note of your secret number and keep it in a familiar place. The TV Channel Setup and Parental Control will not be selectable from the menu if you do not first configure your secret number. EN 3-37 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 56 << TV Setup Operation >> General (Continue) Example Advanced Programme Title Display (DTV only) This function allows you to display programme information such as the title and airtime by tuning a channel. NOTE This function is available only when the DTV mode is selected. EN 3-38 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 57 << TV Setup Operation >> General (Continue) Example Advanced Auto Wide (DTV only) The “Auto wide” allows the TV to switch automatically among the different picture size. NOTE Use “Wide mode” if an image does not switch to the appropriate picture size. When the broadcast signal contains no aspect ratio information, the function will not work even if enabled. EN 3-39 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 58 << TV Setup Operation >> General (Continue) Example Advanced CI Menu In order to receive coded digital stations, a common interface module (CI module) and a CA card must be inserted in the CI slot of the 1 Carefully insert the CI module in the CI slot with the contact side forward. 2 The logo on the CI module must be facing outward from the rear of the TV. Checking CI module information This menu is only available for digital stations. The content of this menu depends on the provider of the CI module. Module General information on CI module displays. Menu Adjustment parameters of each CA card displays. Enquiry You can input numerical values such as passwords here. EN 3-40 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 59 << TV Setup Operation >> General (Continue) Example Advanced CI Menu (Continue) NOTE CI slot is not available for LC-45LE580X. It takes a few minutes to certify the licence key when you insert a CA card into the CI module for the first time. This process may fail when there is no antenna input or you have never run “Auto installation”. The CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You can only use the POWER during upgrading. Copy protected content may not be output or may be output with a copy control signal. The protect icon* is displayed when INFO is pressed while watching copy protected contents. *Protect icon: If the TV displays an update confirmation message for the CA card while receiving CI compatible broadcasts, follow the screen prompts. Make sure that the CI module is properly inserted. If the old CAM is used, authentication may fail. In such cases, contact the contracted service provider. EN 3-41 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 60 << TV Setup Operation >> General (Continue) Example Advanced Operation Lock Out This function locks the operation buttons on the TV and the remote control. Off: No adjustment. RC Control Lock: All buttons on the remote control are locked. Button Control Lock: All buttons on the TV, except POWER, are locked. When "RC Control Lock" or "Button Control Lock" is selected, a confirmation screen appears. Yes: Locks the operation buttons. No: No adjustment. NOTE To unlock the buttons on the remote control by using the control panel of the TV. (See the Setup Guide.) EN 3-42 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 61 << TV Setup Operation >> General (Continue) Example Advanced TV Location Select "Home" or "Store" for the location where you plan to install the TV. NOTE Normally set "TV Location" to "HOME". If you set "TV Location" to "Store", you will not be able to use some menus. EN 3-43 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 62 << TV Setup Operation >> General (Continue) Example Advanced Demo (store mode only) You can select the image from several types of demo mode. NOTE What kinds of setting item are available depends on the model of your TV. This function will be canceled when you press EXIT on the remote control unit. "Demo" may not be selected depending on input signal type or application status. "Demo" may be automatically canceled depending on input signal type. EN 3-44 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 63 << TV Setup Operation >> General (Continue) Example Factory Reset - TV If complex adjustments are made and the settings cannot be restored to normal, you can reset the settings to the factory preset values. If you have already set the Secret No., input the 4-digit secret number here. NOTE The Language settings will not be changed. To reset all data, including Google Accounts, execute "Storage & Reset" from Settings on the HOME screen. EN 3-45 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 64: Devices Operation
<< Devices Operation >> Video In Audio Select This function sets the terminal to output the computer audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. To perform the operation, refer to "Devices" > "Video in" > "HDMI 3" > "Audio Select". HDMI 3 HDMI(Digital): Select this when the TV and PC are connected using an HDMI-certified cable and audio is input via the same cable. HDMI+Analog: Select this when the TV and PC are connected using a HDMI-certified cable and the audio is input via INPUT 5 (L/R). NOTE When "Audio Select" is set to "HDMI+Analog", sound will not be produced if you use only an HDMI-certified cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection. If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set "Audio Select" to "HDMI(Digital)". "Audio Select" can only be set for the HDMI IN 3. EN 4-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 65: Audio Out
<< Devices Operation >> Audio Out Output Select Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL+/- on the remote control unit or on the TV. Sound via the AUDIO OUT terminal is not adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUT terminal is adjusted with VOL+/- on the remote control unit or on the TV. Sound via speaker is muted. EN 4-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 66 << Devices Operation >> Audio Out (Continue) Audio Setup You can output digital audio to an AV amplifier or similar device whose DIGITAL AUDIO INPUT terminal is connected to the DIGITAL AUDIO OUT terminal on the TV. Please select an audio output format compatible with the audio format of the programme you are watching and the equipment connected. PCM: For connecting to equipment that does not support Dolby Digital. The same audio (main, sub, or main/sub) as the audio of the programme being viewed is output. 2-channel audio with a sampling rate of 48 kHz or less is output as linear PCM audio. Bitstream: For connecting to an audio system that supports Dolby Digital. Audio is output through both the main and sub channels. NOTE Analog channel audio, Video input audio, PC input audio and HDMI-Analog input audio are output in PCM mode even when "Bitstream" is selected. PCM digital input signals are output in PCM mode even when "Bitstream" is selected. EN 4-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 67 << Devices Operation >> Audio Out (Continue) Speaker Select You can select to listen to the TV sound only from the LINK-compatible audio system. Internal Speaker: The sound is output from the TV speaker. External Devices: The sound from the TV speaker is muted and only the sound from the LINK-compatible audio system is audible. You can use VOL+/- and MUTE. Audio Setup You can output digital audio to an AV amplifier or similar device whose HDMI terminal is connected to the HDMI1/ARC terminal on the TV. Please select an audio output format compatible with the audio format of the programme you are watching and the equipment connected. (See page 4-3.) EN 4-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 68: Direct Button Operation
<< Direct Button Operation >> Changing Channels NOTE You can change channels in several ways. When selecting a 1-digit channel number, Method 1 it is not necessary to press 0 before the Using CH / on the remote control unit or number. on the TV. When you enter 0-9 only, channel Method 2 selection will be made if there is no Using remote control buttons 0-9. operation within a few seconds. If you push "0" by itself, nothing will Examples: happen. To select a 1 or 2-digit channel number Complete the above steps within a few (e. g., Channel 5): seconds. Press 5 (ENTER) To select a 3-digit channel number (e. g., Channel 115): Press 1 1 5 (ENTER) EN 5-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 69: Changing Volume
<< Direct Button Operation >> Changing Volume You can change the volume by pressing VOL+/- on the TV or on the remote control unit. To increase the volume, press VOL +. To decrease the volume, press VOL -. Audio status Output Select Output device Fixed Variable TV Speaker Variable Sound Mute Fixed Sound (Volume AUDIO OUT Variable Sound MAX) DIGITAL AUDIO OUT, Fixed Sound (Volume Fixed Sound (Volume HDMI IN 1 (ARC) MAX) MAX) EN 5-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 70: Mute
<< Direct Button Operation >> MUTE Mutes the current sound output. Press MUTE. " " will be displayed on the screen for 30 minutes. NOTE Mute can be cancelled by pressing VOL+/- or MUTE. EN 5-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 71: Flashback
<< Direct Button Operation >> FLASHBACK Press (FLASHBACK) to switch to the previously tuned channel or previous input mode. Press (FLASHBACK) again to switch back to the currently tuned channel. NOTE (FLASHBACK) will not work if no channel has been changed after the TV is turned on. With (FLASHBACK), only input from TV, HDMI 1 through 4, or Video will be stored in Memory. EN 5-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 72: Audio
<< Direct Button Operation >> When receiving a bilingual signal AUDIO Each time you press AUDIO, the mode switches among Nicam Dual1, Nicam Dual2 Switching the digital audio format (DTV and Mono. only) If multi sound modes are received, each time you press AUDIO the mode switches. NOTE The sound mode screen disappears in six seconds. When receiving a monaural signal Selectable items vary depending on the Each time you press AUDIO, the mode received broadcasts. switches between Nicam Mono and Mono. The audio description sound is selected depending on the main audio. Switching the analogue audio format In the TV mode of A2 TV broadcasts You can switch between multiple audio modes When receiving a stereo signal when watching a multiple audio or stereo Each time you press AUDIO, the mode broadcast programme. switches between Stereo and Mono. When receiving a bilingual signal Each time you press AUDIO, the mode In the NICAM TV broadcasts switches among Dual1 and Dual2. When receiving a stereo signal Each time you press AUDIO, the mode switches between Nicam Stereo and Mono. When receiving a monaural signal When you press AUDIO, “Mono” displays. EN 5-5 ENGLISH ...
Page 73: Sleep Timer
<< Direct Button Operation >> Sleep Timer Allows you to set a time when the TV automatically switches to standby. Press SLEEP. The remaining time displays when the sleep timer has been set. Each time you press SLEEP, the remaining time switches as shown below. 30min 60min 90min 180min 150min 120min When set, the time automatically starts counting down. If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting. When it is 5 minutes before the time expires, the remaining time will start to keep appearing every minute. NOTE Select "Off" by pressing SLEEP to cancel the sleep timer. The TV will enter standby when the remaining time reaches 0. EN 5-6 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 74: View Mode
<< Direct Button Operation >> VIEW MODE You can select the screen size. 1 Press VIEW. Current View Mode is displayed. 2 Press VIEW while the View Mode indicator is displayed to select a desired item on the menu. View Mode will toggle within selectable options for the type of video signal currently being received when you press VIEW button. For HD programmes Full Underscan Displays with an overscan image. Crops all sides of Displays an image with the same number of pixels on the screen screen. when receiving HD signals only. NOTE When using Underscan, it is possible to see noise or bars around different outer portions of the screen. Please change view mode to correct this. This feature is available with TV, HDMI IN 1-4, and Video input. Availability in other input modes varies according to the individual App specifications. Some items do not appear depending on the type of received signal. EN 5-7 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 75 << Direct Button Operation >> VIEW MODE (Continue) For 4:3 programmes Example: Screen size images Normal Full Cinema 16:9 Normal Keeps the original aspect ratio in a full For 16:9 squeeze pictures. screen display. For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes. Cinema 14:9 Zoom 14:9 For 14:9 letterbox pictures. A thin side For 14:9 letterbox pictures. Bars may appear on the top and bottom with some bar appears on each side, and you may also see bars on the top and bottom programmes. with some programmes. EN 5-8 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 76 << Direct Button Operation >> VIEW MODE (Continue) For PC Example: Screen size images Input signal Normal Full Cinema 16:9 Dot by Dot Keeps the original An image fully fills the For viewing Detects the resolution aspect ratio in a full screen. widescreen of the signal and screen display. programmes. The top displays an image with and bottom of the the same number of image is cropped. pixels on the screen. Input signal Full Dot by Dot 16:9 An image fully fills the Detects the resolution screen. of the signal and displays an image with the same number of pixels on the screen. NOTE Connect the PC before making adjustments. See the Setup Guide. Selectable screen size may vary with input signal type. EN 5-9 ENGLISH ...
Page 77: Netflix
<< Direct Button Operation >> NETFLIX Displays the NETFLIX screen. Press NETFLIX. NOTE If you press the NETFLIX button when the TV is turned off, the TV turns on and the NETFLIX screen is displayed. To enjoy Netflix, you need to make: —a broadband Internet connection (See page 9-1.) —settings of Internet Setup (See page 9-1.) EN 5-10 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 78: Enjoying Photo/Music/Video Playback
<< Enjoying Photo/Music/Video Playback >> Preparation You can connect the TV to a USB memory device, USB hard drive, SD memory card, Home Network server, Smartphone or Tablet to enjoy viewing pictures, listening to music, and watching videos. NOTE SD card slot is not available for LC-45LE580X. Depending on the USB memory device/USB hard drive/SD memory card/Home Network server, the TV may not be able to recognize the recorded data. It may take time to read the recorded data if the USB memory device/USB hard drive/SD memory card/Home Network server contains many files or folders. Use only alphanumeric characters for naming files. File names over 80 characters (may vary depending on character set) may not be displayed. Connecting a USB Memory Device/USB Hard Drive/SD Memory Card Insert the USB memory device or SD memory card with recorded photos, music or videos into the USB 1, USB 2 or SD memory card slot on the TV. If USB memory devices are inserted into multiple terminals, the USB 1 terminal has priority. EN 6-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 79 << Enjoying Photo/Music/Video Playback >> Preparation (Continue) When connecting a USB hard drive, be sure to use a hard drive with an AC adapter. Do not remove a USB memory device or SD memory card from the TV while transferring files, using the slide show function, or switching screens, or before you exit "Content Player". Do not insert and remove a USB memory device/USB hard drive/SD memory card to and from the TV repeatedly. When using a card reader, be sure to insert a USB memory device first. CAUTION Do not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV. Using a USB extension cable with the USB memory device may prevent the TV from performing correctly. Connecting a Home Network Server Connect the TV to the Home Network server using an ETHERNET cable. You can also connect a Home Network server by using a wireless LAN. NOTE Do not disconnect a Home Network server from the TV while transferring files, when a screen is switching to another or before you exit "Content Player". Do not connect and disconnect a Home Network server from the TV repeatedly. EN 6-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 80: Selecting The Folders To Play Back
<< Enjoying Photo/Music/Video Playback >> Selecting the Folders to Play Back To play back data on a USB memory device or SD memory card, insert the USB memory device or SD memory card on the TV. 1 Select "Content Player" from the Devices screen, or launch the Content Player app from HOME screen. 2 Press / to select "Photo", "Music" or "Video", and then press (ENTER). Example 3 Press / (or / ) to select the drive/server where you want to find your file, and then press (ENTER). 4 Press / to select the desired folder, and then press (ENTER). EN 6-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 81 << Enjoying Photo/Music/Video Playback >> Selecting the Folders to Play Back (Continue) NOTE If the TV is turned off and then on again, the number assigned to the USB may change. USB Device Compatibility USB device USB Memory, USB card reader (Mass Storage class), USB hard drive File system FAT/FAT32 SD memory card Compatibility SD card SD/SDHC memory card File system FAT/FAT32 Photo file format Format JPEG, PNG, BMP Music file format Format Sampling rate Bitrate [KHz] [Kbps] 8/11.025/12/16/ 8~320 22.050/24/32/44.1/48 32/44.1/48 8~320 8/11.025/16/22.05/ 8~384 32/44.1/48/64/88.2/96 8/11.025/12/16/ 8~1024 22.050/24/32/44.1/48 EN 6-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 82 << Enjoying Photo/Music/Video Playback >> Selecting the Folders to Play Back NOTE (Continue) Progressive format jpeg files are not supported. Video file format USB 1.1 devices may not be played properly. Container Video Audio Operation using USB hubs is not guaranteed. MPEG-1 MP2: MPEG-1 Layer2 Some video file formats may not be MPEG-2 MP3: MPEG-1 Layer3 MPEG-4 AAC played depending on the file. H.264 Some images may not be displayed in the appropriate aspect ratio depending on the file format. MPEG-1 MP2: MPEG-1 Layer2 File extensions are not used to determine MPEG-2 MP3: MPEG-1 Layer3 MPEG-4 AAC the file format. H.264 If you insert any card other than the VP8 SD/SDHC (class 6 or higher), it will not H.265(HEVC) VORBIS ...
Page 83 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server Photo Mode Viewing Thumbnails Example Buttons for thumbnail/list operations Buttons Description Select a desired item. / In Thumbnail mode: Select a desired item. In List mode. Return to the previous process. In Thumbnail mode: Select a desired item. In List mode, when selecting a folder icon: Enter this directory. In List mode, when selecting a photo file: Enlarge the photo. When selecting a folder icon: Enter this directory. (ENTER) When selecting a photo file: Enlarge the photo. In Thumbnail mode: Return to the previous process. In List mode. Exit application. (Back) B (bl ue) Change Thumbnail/List mode. Y (yel l ow) Display the Menu screen. EN 6-6 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 84: Playing Back Files On A Usb Memory
<< Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue) Menu for thumbnail operations Press / to select an item and make settings to your preferences. Example Sort You can change the way in which files are ordered. Press / to select "Type", "Date" or "Name", and then press (ENTER). Media Type Switch the media type when the Recursive Parser display is displayed. Thumbnail Size Change the thumbnail size. Small/Medium/Large Recursive Parser Display all files according to the Media Type settings. NOTE You can see the file name, file size and pixel size of the selected photo in the upper-left corner of the screen. When you are viewing the Content Player app, you cannot configure Picture/Audio settings. EN 6-7 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 85 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Repeat Memory Device/SD Memory Set whether to show the slide show repeatedly. None/Repeat One/Repeat All Card/Home Network Server (Continue) Shuffle Shuffle the image files within the folder and Slide Show display as a slide show. The photos displayed on the thumbnail Duration selection screen are displayed as a slide show. Specify the length of time before the next image appears. Buttons for slide show operation Press / to select the desired length of the Buttons Description time, and then press (ENTER). Play the Slide Show. Short/Medium/Long Pause the Slide Show. Effect Select the desired item. / / , / Specify the effect for transitioning to the next (ENTER) image.
Page 86 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue) Music Mode Viewing Thumbnails Example Buttons for thumbnail/list operations Buttons Description Select a desired item. / In Thumbnail mode: Select a desired item. In List mode. Return to the previous process. In Thumbnail mode:Select a desired item. In List mode, when selecting a folder icon: Enter this directory. In List mode, when selecting a music file: Play music. When selecting a folder icon: Enter this directory. (ENTER) When selecting a music file: Play music. In Thumbnail mode: Return to the previous process. In List mode. Exit application. (Back) B (bl ue) Change Thumbnail/List mode. Y (yel l ow) Display the MENU screen. NOTE When you are viewing the Content Player app, you cannot configure Picture/Audio settings. EN 6-9 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 87 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue) Menu for thumbnail operations Example Sort You can change the way in which files are ordered. Press / to select "Date", "Genre", "Artist" or "Album", and then press (ENTER). Media Type Switch the media type when the Recursive Parser display is displayed. Thumbnail Size Change the thumbnail size. Small/Medium/Large Recursive Parser Display all files according to the Media Type settings. EN 6-10 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 88 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Menu for playing mode Memory Device/SD Memory Example Card/Home Network Server (Continue) Playing Mode Buttons for playing mode Buttons Description The fast reverse speed changes every time you press Repeat The fast forward speed changes Configure the repeat playback settings. every time you press None/Repeat One/Repeat All Pause the music. Shuffle Go to the previous file. Shuffle the music within the folder. Go to the next file. Hide Spectrum/Show Spectrum Select a desired item. / / , / Show or hide the spectrum. (ENTER) Return to the previous process. Lyric (Bac k ) You can change the lyric display type. Y (y ellow) Display the Menu screen.
Page 89 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue) Video Mode Viewing Thumbnails Example Buttons for thumbnail/list operations Buttons Description Select a desired item. / In Thumbnail mode: Select a desired item. In List mode. Return to the previous process. In Thumbnail mode: Select a desired item. In List mode, when selecting a folder icon: Enter this directory. In List mode, when selecting a video file: Play the video file. When selecting a folder icon: Enter this directory. (ENTER) When selecting a video file: Play the video file. In Thumbnail mode: Return to the previous process. In List mode. Exit application. (Back) B (bl ue) Change Thumbnail/List mode. Y (yel l ow) Display the Menu screen. EN 6-12 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 90 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Memory Device/SD Memory Card/Home Network Server (Continue) Menu for thumbnail operations Example Sort You can change the way in which files are ordered. Press / to select "Type", "Date" or "Name", and then press (ENTER). Media Type Switch the media type when the Recursive Parser display is displayed. Thumbnail Size Change the thumbnail size. Small/Medium/Large Recursive Parser Display all files according to the Media Type settings. NOTE When you are viewing the Content Player app, you cannot configure Picture/Audio settings. EN 6-13 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 91 << Enjoying Photo/Music/Video Playback >> Playing Back Files on a USB Menu for playing mode Memory Device/SD Memory Example Card/Home Network Server (Continue) Playing Mode Buttons for playing mode Buttons Description The fast reverse speed changes every time you press Repeat Play the video Configure the repeat playback settings. The fast forward speed changes None/Repeat One/Repeat All every time you press Screen Mode Pause the video. Set the screen size. Go to the previous file. Auto/Original Stop the video. Go to the next file. Select a desired item. / / , / (ENTER) Return to the previous process. (Bac k ) Y (y ellow) Display the Menu screen.
Page 92: Playing Back Files From A Portable Device
<< Enjoying Photo/Music/Video Playback >> Playing Back Files from a Portable Device With the remote playback function, you can use your portable device to play back pictures, video, and music on the Home Network server. Preparation Use Wi-Fi to connect the smartphone or tablet to the TV. NOTE A wireless access point is required to use a portable device. EN 6-15 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 93 << Enjoying Photo/Music/Video Playback >> Playing Back Files from a Portable Device (Continue) 1 Select "Content Player" from the Devices screen, or launch the Content Player app from HOME screen. 2 Press / to select "Remote play" icon, and then (ENTER). 3 While the TV is in standby mode, send photos/music/video from the smartphone, tablet, or similar device to the TV. To use the remote playback function, your portable device must be a DLNA Certified Digital Media Controller. NOTE This function will only start when the standby screen of Remote play is displayed after you launch the Content Player app from the HOME screen. This function may not work while an Internet application is being used. For information on the compatible formats, see "Home Network Server Compatibility" on page 6-5. Some Digital Media Controllers and Remote play applications are not supported. In this situation, regardless of whether the file can be played back, the message "Playback not possible" may be displayed, and playback may be stopped. EN 6-16 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 94: Using Link Operation
<< Using LINK Operation >> Controlling HDMI Equipment Using LINK Operation NOTE What’s LINK Operation? If the equipment does not operate, turn on the equipment and select the Using the HDMI CEC (Consumer Electronics Control) protocol, with appropriate input source using DEVICES. LINK Operation you can interactively operate compatible system The LINK feature may not operate properly when an HDMI splitter or AV equipment (Blu-ray disc equipment, AV amplifier, DVD). selector unit is used. These devices may cause interruptions to the By connecting LINK-compatible devices with HDMI-certified cables to image and/or sound. the TV, you can control a recorder or AV amplifier using the remote Connected LINK-compatible devices can be operated without changing the control of the TV. settings of the remote control unit. LINK Operation allows you to operate the HDMI-connected equipment One Touch Play with one remote control. While the TV is in standby mode, it automatically turns on and plays back NOTE the image from the HDMI source. For connecting the TV to LINK-compatible equipment, use Single remote control commercially available cables. The LINK Operation automatically recognizes the connected HDMI device Point the remote control toward the TV, not to connected HDMI and you can control the TV and the devices as if using a universal remote equipment. control. Video noise may occur depending on the type of HDMI cable used. Control the LINK-compatible audio system Make sure to use an HDMI-certified cable. Set the volume of LINK-compatible audio system. Up to 3 pieces of HDMI recording equipment and one AV amplifier can be connected using this system. NOTE The above description is an example of the LINK Operation function.
Page 95 << Using LINK Operation >> Controlling HDMI Equipment Using LINK Operation (Continue) One Touch Playback LINK Operation allows you to operate the HDMI-connected equipment with one remote control. Press to start playing back a title. The last played program is played back. You can use the following buttons during broadcast viewing. Buttons Description Turns the power of the HDMI SOURCE connected devices on and off. Hold down this button to go in reverse. Starts playback. Hold down this button to fast forward. Stops playback. Sets pauses and still pictures. Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter. Pressing quickly once takes you to the start of the next chapter. Each time you press it, you move ahead to the start of the next chapter. EN 7-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 96: Using A Pc
<< Using a PC >> Setting Audio Input Audio Select HDMI This function sets the terminal to output the computer audio. The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item. To perform the operation, refer to "Devices" > "Video in" > "HDMI 3" > "Audio Select". HDMI 3 HDMI(Digital): Select this when the TV and PC are connected using an HDMI-certified cable and audio is input via the same cable. HDMI+Analog: Select this when the TV and PC are connected using a HDMI-certified cable and the audio is input via INPUT 5 (L/R). NOTE When "Audio Select" is set to "HDMI+Analog", sound will not be produced if you use only an HDMI-certified cable to connect HDMI- compatible equipment. To produce sound, you should make an analog audio connection. If you want to connect HDMI-compatible equipment using only an HDMI-certified cable, set "Audio Select" to "HDMI(Digital)". "Audio Select" can only be set for the HDMI IN 3. EN 8-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 97: Pc Compatibility Chart
<< Using a PC >> PC Compatibility Chart It is necessary to set the PC correctly to display XGA and WXGA signal. Horizontal Vertical Resolution VESA Standard Frequency Frequenc y 720 x 400 31.5 kHz 70 Hz ― 31.5 kHz 60 Hz 640 x 480 37.9 kHz 72 Hz 37.5 kHz 75 Hz 35.1 kHz 56 Hz 37.9 kHz 60 Hz SVGA 800 x 600 48.1 kHz 72 Hz 46.9 kHz 75 Hz 48.4 kHz 60 Hz 1024 x 768 56.5 kHz 70 Hz 60.0 kHz 75 Hz WXGA 1360 x 768 47.7 kHz...
Page 98: Using The Internet
<< Using the Internet >> Connecting to the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. You can enjoy a variety of streaming content and Internet applications. It is necessary to configure the network settings in order to enjoy streaming content and internet applications. These settings can be configured from "HOME" > "Settings" > "Device" > "Network". NOTE To connect your TV to the Internet, you must have a broadband Internet connection. If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your Internet service provider or telephone company. When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same time. Use only one of the connection types. Using an ETHERNET cable Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband router (commercially available). Using the wireless LAN This TV is equipped with a wireless LAN function. For a wireless LAN connection, you must use wireless setup to connect the access point and TV. EN 9-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 99 << Using the Internet >> Connecting to the Internet (Continue) NOTE This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter. A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the wireless LAN signal may be poor or drop, or the connection speed may become slower. - When used in buildings made with concrete, reinforced steel, or metal - When placed near objects that obstruct the signal - When used with other wireless devices that emit the same frequency - When used in the vicinity of microwave ovens and other devices that emit a magnetic field, electrostatic charge, or electromagnetic interference When there is significant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that supports IEEE802.11ac (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point. Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification. A wireless LAN router/access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point for setup. If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case, disable the stealth mode on the access point. A stable connection speed is required to play back streaming content. Use an Ethernet connection if the wireless LAN speed is unstable. Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. Please follow the legislation in your country when using the wireless LAN outdoors. If you have failed to connect to the Internet in the above operation, then an error message will appear. In this case, press EXIT to exit from the connected TV feature to make changes to the network settings. If you still cannot connect to the Internet, please consult your Internet service provider or telephone company. You cannot configure the settings from "HOME" > "Settings" > "Device" > "Network" while using an application. If you must configure your "Network" settings, press the EXIT key to exit the function. EN 9-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 100: Using Keyboard And Mouse
<< Using the Internet >> Using Keyboard and Mouse You can use a keyboard or mouse for operating the TV when using applications. When you use the USB devices, connect the device to the USB terminal on the TV. When you use the bluetooth device, make necessary settings with "Bluetooth". NOTE The keyboard or mouse may not operate properly depending on the application being used. The bluetooth device may not operate properly depending on the device being used. EN 9-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 101: Notes
<< Using the Internet >> Notes DISCLAIMERS This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any authorization or terms of use provided by such content or service provider. SHARP shall not be liable to you or any third party for your failure to abide by such authorization or terms of use. Unless otherwise specifically authorized by the applicable content or service provider, all third party content and services provided are for personal and non-commercial use; you may not modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any content or services available via this device. SHARP is not responsible, nor liable, for customer service-related issues related to the third party content or services. Any questions, comments or service-related inquiries relating to the third party content or service should be made directly to the applicable content or service provider. You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure to configure your device properly. SHARP, its directors, officers, employees, agents, contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause or whether or not it could have been avoided. ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN "AS-IS" AND "AS AVAILABLE" BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS. SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS. IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. EN 9-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 102: Appendix
<< Appendix >> Troubleshooting Problem Possible Solution No picture Is connection to other components correct? Problem Possible Solution If the PC image is not displayed, check the following: No power Check if you pressed POWER on the remote control unit. - When connecting a laptop PC to the TV, check that display output Is the AC cord disconnected? mode of the PC is set to external monitor. Has the power been turned on? Picture quality To enjoy HD images from external equipment, you are required to set of HD programs is up HDMI connection or component connection. Unit cannot External influences such as lightning, static electricity, may cause poor. If the program content is not of HD quality, HD images cannot be be operated. improper operation. In this case, operate the unit after first turning off the displayed. Check that the program you are viewing provides HD power of the TV or unplugging the AC cord and replugging it in after 1 or images. 2 minutes. The HD cable/satellite set-top box may need to be configured to Remote Is the equipment to be operated by the remote control unit set output HD images via cable/satellite. control unit correctly? Press TV to set the remote control unit to the setting for The cable/satellite broadcast may not support a signal resolution of does not operating the TV. 1080p.
Page 103 << Appendix >> Troubleshooting (Continue) Problem Possible Solution Google Cast image/ Check pairing. Problem Possible Solution audio cannot be output to the TV. No sound Is connection to other components correct? Is the volume too low? Page 5-2 Is "Variable" selected in "Output Select"? Page 4-2 Have you pressed MUTE on the remote control unit? Page 5-3 Check the audio output of the connected external equipment. Is the volume too low or muted? When external equipment is connected via an HDMI cable, you may need to configure the audio to be output through the HDMI cable. When audio is not output from external equipment connected to the HDMI IN 3 terminal, check the "Audio Select" setting. Page 8-1 Even when external equipment is connected using an HDMI- certified cable, an audio cable connection may be required depending on the type of equipment and the media being played back. In this case, in addition to connecting an HDMI- certified cable to the HDMI IN 3 terminal, connect a cable to the INPUT 5 (L/R) terminal and set "Audio Select" to "HDMI+Analog". Page 8-1 When connecting a PC via an HDMI-certified cable, check the following: - Is the audio output of the PC configured correctly? Check the audio output settings and output audio format in Sound Properties on the PC.
Page 104: Troubleshooting - Error Message
<< Appendix >> Troubleshooting Error Message The example of an error message Possible Solution displayed on a screen No broadcast now. Check the antenna cable. Check that the antenna is correctly setup. Check the broadcast time in the program guide. An incompatible audio This message is displayed when an audio format other than signal has been PCM, Dolby Digital is input. received. Check the - Set the audio output format of connected external HDMI output device settings. equipment to PCM, Dolby Digital. - Refer to the operation manual of the external equipment for setting details. EN 10-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 105: Information On The Software License For This Product
<< Appendix >> Information on the Software License for This Product Software License You can read the software licenses in the on-screen display menu. Refer to "HOME" > "Settings" > "Devices" > "About" > "Legal information" > "Open source licenses" . Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Cautions regarding use in high and low temperature environments When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the front panel to malfunction. Storage temperature: -20°C to +60°C EN 10-4 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 106: Trademarks
<< Trademarks >> Google, Google Cast, Android and Android TV are trademarks The Bluetooth® word mark and logos are registered trademarks of Google Inc. owned by Bluetooth SIG, Inc. and any use of such marks by SHARP Corporation is under license. Other trademarks and trade Manufactured under license from Dolby Laboratories. Dolby, names are those of their respective owners. Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & The terms HDMI and HDMI High-Definition Multimedia DTS and the Symbol together are registered trademarks, and Interface, and the HDMI Logo are trademarks or registered DTS 2.0+Digital Out is a trademark of DTS, Inc. © DTS, Inc. All trademarks of HDMI Licensing, LLC in the United States and Rights Reserved. other countries. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. SDHC Logo is a trademark of SD-3C, LLC. EN 11-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 107: Specifications
1020 (W) x 616 (H) x 255 (D) mm 1123 (W) x 687 (H) x 255 (D) mm 1355 (W) x 823 (H) x 303 (D) mm Weight without stand (with stand) 12kg (13kg) 20kg (21kg) 23.5kg (25kg) Operating temperature 0°C to +40°C *1 If you insert any card other than the SD/SDHC (class 6 or higher), it will not work. As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units. Specification may differ depending on the selected country. CAUTION Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Carefully read the instructions that come with the bracket before beginning work. EN 12-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 108: Wireless Lan
<< Specifications >> Wireless LAN Spec ific ation Standard IEEE 802.11a/b/g/n/ac Static WEP (64/128 bit kry index 1 only) Security WPA-PSK (TKIP) WPA2-PSK (AES) IEEE802.11b: DBPSK, DQPSK, CCK / DSSS HRDSSS IEEE802.11a: BPSK, QPSK, 16QAM, DBPSK, DQPSK, CCK / OFDM Modulation IEEE802.11g: BPSK, QPSK, 16QAM, DBPSK, DQPSK, CCK, PBCC / OFDM IEEE802.11n: BPSK, QPSK, 16QAM, 64QAM / OFDM IEEE802.11ac: BPSK, QPSK, 16QAM, 64QAM, 256QAM / OFDM IEEE802.11b: 1, 2.5, 5, 11Mbps IEEE802.11a: 6, 9, 12, 18, 24, 36, 48, 54Mbps Throughput IEEE802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps IEEE802.11n: ～300Mbps IEEE802.11ac: ～866.6Mbps EN 12-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 109: Dimensional Drawings
<< Dimensional Drawings >> LC-45LE580X Unit: mm EN 13-1 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 110: Lc-50Le580X
<< Dimensional Drawings >> LC-50LE580X Unit: mm EN 13-2 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 111: Lc-60Le580X
<< Dimensional Drawings >> LC-60LE580X Unit: mm EN 13-3 ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...
Page 112 << ENGLISH | FRANÇAIS | PORTUGUÊS | РУССКИЙ | 中文 | INDONESIA | ภาษาไทย | TIẾNG VIỆT | ‫ | ﻋرﺑﻲ‬АҒЫЛШЫН | O'ZBEK TILIDA...

This manual is also suitable for:

Aquos ue630x series

Sharp AQUOS LE580X Series Operation Manual

1 Part Names

2 How to Select the TV Mode

3 TV Setup Operation

4 Devices Operation

5 Direct Button Operation

6 Enjoying Photo/Music/Video Playback

7 Using LINK Operation

8 Using a PC

9 Using the Internet

10 Appendix

11 Trademarks

12 Specifications

13 Dimensional Drawings

Quick Links

Troubleshooting

Related Manuals for Sharp AQUOS LE580X Series

Summary of Contents for Sharp AQUOS LE580X Series

This manual is also suitable for:

Table of Contents