Power Adapter; Headphones - Philips eXpanium EXP503 User Manual

Power supply/Headphones

Power adapter

Only use the AY 3160 power adapter (4.5 V/400 mA direct current, positive
pole to the center pin). Any other product may damage the unit.
1
Make sure the local voltage corresponds to
the adapter´s voltage.
2
Connect the power adapter to 4.5V DC on
the unit and to the power outlet.
Note: Always disconnect the adapter if you are
not using it.

Headphones

Connect the supplied headphones to
LINE OUT/p.
Note: LINE OUT/p can also be used for
connecting this unit to your HiFi system. Set
VOL E on this unit to position 8 and adjust
volume and sound with your HiFi system.
Use your head when using headphones
Hearing safety
Do not play your headset a high volume. Hearing experts advise against
continuous extended play. If you experience a ringing in your ears, reduce
the volume or discontinue use.
Traffic safety
Do not use while operating a motorized vehicle. It may create a traffic hazard
and it's illegal in many areas.You should use extreme caution or temporarily
discontinue use in potentially
hazardous situations. Even if your headset is an open-air type designed to let
you hear outside sounds, don't turn up the volume so high that you can't
hear what's around you.
14