Attention: The tamper detect switch
stack or route the cable of the coin-cell battery upon the tamper detect switch.
When installing: Ensure that the connector is firmly attached.
1090 Thermal-fan assembly
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 72
•
"1020 Bottom door" on page 73
Attention:
• Do not handle the thermal-fan assembly roughly. Improper handling of the thermal-fan assembly can
cause distortion or deformation and imperfect contact with components.
• Do not touch or apply any excessive force to the fan motor. It might cause damage to the thermal-fan
assembly or might cause the computer to malfunction.
80
L570 Hardware Maintenance Manual
a
is sensitive. When you are installing a new coin-cell battery, do not