Cleaning; Troubleshooting - RCm -77-N14NF Instruction Manual

Instruction Manual

CLEANING

•
Unplug the cooler prior to cleaning.
•
Unplug the cooler at the electrical outlet; never pull the service cord.
•
Do not use sharp or pointed objects for cleaning.
•
Do not spray water directly onto cooler, and do not use hard or steel brushes to clean the cooler.
•
Clean the inside cabinet of the cooler with a clean, damp cloth or with mild soap.
•
Avoid damaging the cooler by using only non-abrasive cleaning products. Do not use organic solvents, boiling water,
washing powder or acid while cleaning.
If the cooler is unused for a long period of time, unplug the electrical cord, follow cleaning instructions, and open or remove the lid.
MOVING THE COOLER
•
Remove all product from the unit.
•
Secure all loose parts inside the cooler.
•
Tape the door shut.
•
Ship the cooler in an upright position.
REFRIGERATION
•
The RCM-77 Electric Impulse Cooler utilizes R134a refrigerant.
SPECIFICATIONS
Model:
RCM-77 Electric Impulse Cooler
Power Supply (V/Hz):
220-240V/50Hz
Dimension (Diameter x H):
22-1/4" x 33-1/4"
Box Dimension (Diameter x H):
23" x 34"

Troubleshooting

The following are NOT malfunctions:
Situation
Liquid fl owing noise within cooler
Refrigeration system is shutdown for longer periods
of time while temperature inside is still very low
Condensation on glass door
Prior to calling service, check the following:.
Issues
Cooler is not working properly
Cooler is not keeping product cool
Excessive noise
Compressor turns on and off frequently
After Sales Service
Information to provide to your qualifi ed service professional:
• Serial number from the interior wall of the cooler;
• Coolersʼ installation address and contact information;
• Installation location hours and operation;
• Nature of problem;
• Any reports of power interruptions;
• Recent service or maintenance completed on the cooler;
• Has the cooler been relocated from original installation location;
• Clear access to the cooler;
• Coolersʼ instruction manual.
8 9
RCM-77
Causes
• This is the sound of the cooling agent fl owing through the pipes.
• This refrigerator is well insulated and can maintain a relatively ambient
temperature.
• This may be due to a high indoor humidity or the coolers temperature is set too
low. Wipe the door dry with a towel.
Solutions
Please check power supply:
• Check the electrical outlet for power, and that the plug is properly inserted.
• Check to see if the circuit breaker is tripped or the fuse is blown.
• Check if the condenser is free of dirt and debris.
• Check for low voltage
• Provide ample space between all products to ensure proper circulation of air.
• Keep unit away from direct sunlight or other heating source.
• Keep the door closed as often as possible.
• Be certain the cooler is not touching external objects or walls.
• Be certain the cooler is placed on a level surface.
• Be certain the cooler is not touching external objects or walls.
• The room temperature is higher than normal.
• The door is not closed completely.
• The door gasket is not sealed properly.
• There is insuffi cient clearance around the cooler.
• The thermostat is not set properly.
• The frequency of cycling will be reduced when all of the product reaches the set
temperature.
Innovative DisplayWorks