Beverage Storage; Maintenance - RCm -77-N14NF Instruction Manual

Instruction Manual

BEVERAGE STORAGE

1
Do not overload the cooler beyond the red limitation line.
2
Leave adequate space between beverage cans to allow air circulation.
3
This cooler is primarily for storing beverage cans and plastic bottles.
Avoid putting glass containers in the cooler.
4
All beverage products should be properly sealed to avoid leaking into the cooler.

MAINTENANCE

Accessing Cooler Components:
1
Remove the basket from the inside of the cooler.
2
Remove the baffler from cooler.
3
Using a Phillips screwdriver,
unscrew the (4) screws at the base
of the cooler.
6 7
4
The body of the cooler can now be worked free from the frame.
5
Lay the body of the cooler on its side to access
components.
Changing Electric Impulse Cooler Graphics:
1
Place graphic around barrel, making sure to align the grill holes in the graphic with the grill
holes on the cooler to allow proper ventilation for the cooler.
2
Wedge the graphic under the plastic frame of the cooler.
RCM-77
6
To re-assemble the cooler align the
notch at base of the body with the
cooler cord. Then reverse steps 1-5.
3
Remove the covering on the double-
stick tape to adhere the graphic in
place.
Innovative DisplayWorks