Care And Maintenance Of Pro-Bot - TTS Pro-Bot Manual

®
Pro-Bot
Pro-Bot® is a programmable floor robot designed for more advanced control
techniques. It is ideal progression from the TTS Bee-Bot® (TTS Code - EL00363). Pro-Bot
can be used simply by programming arrows or inputting more complex commands
and procedures. Built-in light, touch and sound sensors" (x2) and the ability to add a
pen to the device so that Pro-Bot can draw its own route. There are also four locator
points on the body so that K'Nex can be used to build frames.
Also available is Probotix software (TTS Code - EL00477) which allows children to
create their Pro-Bot program using the software and then transfer to the robot using
a USB connection. Similarly programs created on the Pro-Bot can be transferred to the
software. See www.tts-shopping.com for more information.
Important Information
Please read all instructions carefully before use.
Please retain all instructions for future reference.
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 yrs.
Care & Maintenance of Pro-Bot
To clean, wipe the Pro-Bot gently with a clean, damp cloth.
Keep the Pro-Bot away from direct sunlight and heat.
Do not allow the Pro-Bot to come into contact with water or other liquids.
In the event of static, your Pro-Bot may malfunction or lose memory: in this
case, insert a paper-clip or similar into the reset hole located near the On/Off
Switch to reset the Pro-Bot.
The normal function of the product may be disturbed by strong Electro
Magnetic Interference. If so, simply reset the product to resume normal
operation by following the instructions in the user guide. In the event that
the function does not resume, please use the product in other location.
3