Table of Contents
Advertisement
Quick Links
Please dispose of packaging for the product in a responsible
manner. It is suitable
environment, take the packaging to the local amenity tip and
place into the appropriate recycling bin.
Never dispose of electrical equipment or batteries in with your
domestic waste. If your supplier offers a disposal facility
please use it or alternatively use a recognised re-cycling
agent. This will allow the recycling of raw materials and help
protect the environment.
FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,
OR SIP DIRECTLY ON:
TEL: 01509500400
EMAIL: sales@sip-group.com or technical@sip-group.com
www.sip-group.com
Ref: 110815
for recycling.
Help to protect the
16
50 Litre Dust Collector
Please read and fully understand the instructions in this manual
before operation. Keep this manual safe for future reference.
01929
1
Advertisement
Table of Contents
Related Manuals for SIP 01929
Summary of Contents for SIP 01929
- Page 1 This will allow the recycling of raw materials and help protect the environment. FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR, OR SIP DIRECTLY ON: TEL: 01509500400 EMAIL: sales@sip-group.com or technical@sip-group.com 01929 www.sip-group.com...
-
Page 2: Declaration Of Conformity
2004/108/EC EMC Directive 2011/65/EU RoHS Directive And the relevant standard(s), including: EN 60335-2-69:2012 EN 60335-1:2012 EN 62233:2008 EN 55014-1+A2:2011 EN 55014-2+A2:2008 EN 61000-3-2+A2:2009 EN 61000-3-3:2013 Signed: …………………………………... Mr P. Ippaso - Managing Director - SIP (Industrial Products) Ltd Date: 13/05/2015. -
Page 3: Parts List
PARTS LIST CONTENTS Ref. No. Description SIP Part No. Ref. No. Description SIP Part No. Mains lead WD01-00915 Washer WD01-00929 Cable gland WD01-00916 Bushing WD01-00930 On/Off switch WD01-00917 Cover WD01-00931 Left motor casing 67173 Fan blade WD01-00932 (switch side) Nut M5... -
Page 4: Safety Symbols Used Throughout This Manual
Read all these instructions before operating the tool and save this user manual for fu- ture reference. SIP recommends that this tool should not be modified or used for any application oth- er than that for which it was designed. It was designed for the extraction of wood, or wood composite materials from machines such as sanders, saws or planers etc. -
Page 5: Maintenance Instructions
OPERATING INSTRUCTIONS SAFETY INSTRUCTIONS...cont Choose the correct inlet hose adaptor (where needed). WEAR THE CORRECT CLOTHING: Do not wear loose clothing, neckties, rings, bracelets, Fit the inlet hose adaptor into the free end of the inlet hose. or other jewellery, which may get caught in moving parts. Non-slip footwear is recom- Secure in place with the second hose clamp. - Page 6 SAFETY INSTRUCTIONS...cont ASSEMBLY INSTRUCTIONS which it was not designed. FITTING THE FILTER DO NOT OVERLOAD THE MACHINE: It will do the job better and more safely at the rate which it was designed. Open the locking strap and lift off the main motor housing (001). DO NOT EXPOSE THE MACHINE TO RAIN OR USE IT IN WET CONDITIONS: Water entering Sit the filter cartridge inside the filter bag;...
-
Page 7: Contents And Accessories
SAFETY INSTRUCTIONS...cont operation. This SIP dust collector is covered by a 12 month parts and labour warranty covering DO NOT vacuum, or use the dust collector near flammable or combustible liquids, failure due to manufacturers defects. This does not cover failure due to misuse or op- gases, petrol or any other fuels or liquids. -
Page 8: Technical Specifications
This dust collector is fitted with a standard UK 13A type 230V ~ plug. Before using the dust collector inspect the cable and plug to ensure that neither are damaged. If any Part number 01929 damage is visible have it inspected / repaired by a suitably qualified person. If it is Input voltage...
Need help?
Do you have a question about the 01929 and is the answer not in the manual?
Questions and answers