Sharp DV-NC100X Service Manual page 34

Vcr/dvd combination
Hide thumbs Also See for DV-NC100X:
Table of Contents

Advertisement

FLOW CHART NO.11
Hi-Fi E-E audio does not operate normally.
Is each signal supplied to each pin of IC451 as below?
Front input terminal
Rear input terminal
Tuner audio signal
Is the 5V voltage supplied to Pins(14, 30, 36, 62) of
IC451, or the 9V voltage supplied to Pin(60) of IC451?
Is the serial data and the clock signal supplied to
Pins(31, 32) of IC451?
Is the "L" pulse inputted into the Pin(8) of IC451?
Is the audio signal outputted to Pins(56,58) of
IC451?
Is the audio signal inputted into Pins(2,12) of
IC751?
Is the audio signal outputted to Pins(14,15) of
IC751?
Check the line between Pins(14,15) of IC751 and
the audio output terminal (JK751), and service it if
defective.
Replace IC751.
L-ch
R-ch
Pin(63)
Pin(49)
Pin(61)
Pin(52)
Pin(6)
Pin(44)
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Check the peripheral circuit of the front input
terminal and service it if defective.
Check the peripheral circuit of the rear input
No
terminal and service it if defective.
No
No
Is the SIF signal outputted from Pin(22) of the tuner?
Check the line between Pin(6,44)
of IC451 and Pin(22) of tuner,
and service it if defective.
No
Check the circuit of AL+5V, P-ON+5V and
P-ON+9V, and service it if defective.
No
Check the line between Pins(31,32) of IC451 and
Pins(71,72) of IC501, and service it if defective.
No
Check the line between Pin(8) of IC451 and
Pin(83) of IC501, and service it if defective.
No
Replace IC451.
No
Check the line between Pins(56,58) of IC451 and
Pins(2,12) of IC751, and service it if defective.
No
Is approximately 5V voltage supplied to Pin(16)
of IC751, or approximately -6V voltage supplied to
Pin(7) of IC751?
Check the AL+5V line and the AL-30V
Yes
line (R760,R761), and service it if defective.
Yes
Is the "L" pulse inputted into the Pins(9,10,11) of
IC751?
Replace IC501.
1-10-12
Yes
Replace the
tuner.
No
No
No
H9745TS

Advertisement

Table of Contents
loading

Table of Contents