Advanced Ambilight Settings - Philips 43PUT6262 User Manual

6262 series

Hide thumbs

Table Of Contents

Table of Contents

For more info on connecting the TV to your home

network, in Help, press the colour



key

Keywords and look up Network Settings.

Step 2 - Hue Bridge

In the next step, you will link up the TV with

the Philips Hue Bridge.

The TV can only be linked up to one Hue Bridge.

To link the Hue Bridge...

1 - With the TV connected to your home network, it

will show the available Hue Bridges. If the TV did not

find your Hue Bridge yet, you can select Scan

again and press OK.

If the TV found the only Hue Bridge you have, select

the Hue Bridge name and press OK.

If you have more than one Hue Bridge available,

select the Hue Bridge you want to use and press OK.

2 - Select Start and press OK.

3 - Now go to the Philips Hue Bridge and press the

link button in the middle of the device. This will link

the Hue Bridge with the TV. Do this within 30

seconds. The TV will confirm if a Hue Bridge is now

linked to the TV.

4 - Select OK and press OK.

With the Philips Hue bridge linked to the TV, go to

page Hue bulbs.

Step 3 - Hue Bulbs

In the next step, you will select the Philips Hue

bulbs that have to follow the Ambilight.

You can select a maximum of 9 Philips Hue bulbs for

Ambilight+hue.

To select the bulbs for Ambilight+hue...

1 - In the list, mark the bulbs that have to follow the

Ambilight. To mark a bulb, select the bulb name and

press OK. When you mark a bulb, the bulb will blink

once.

2 - When you're done, select OK and press OK.

Step 4 - Configure Bulb

In the following step, you will configure each Philips

Hue bulb.

To configure each Hue bulb...

1 - Select a bulb to configure and press OK. The

bulb you selected is flashing.

2 - Select Start and press OK.

3 - First indicate where you placed the bulb relative

to the TV. A correct setting of the Angle will send the

correct Ambilight colour to the bulb. Select the slider

bar to adjust the position.

4 - Secondly, indicate the Distance between the

bulb and the TV. The further away from the TV, the

weaker the Ambilight colour. Select the slider bar to

adjust the distance.

5 - Finally, set the Brightness of the bulb. Select

the slider bar to adjust the brightness.

6 - To stop configuring this bulb, select OK and

press OK.

7 - In the Configure Ambilight+hue menu, you can

do the same for each bulb.

8 - When all Ambilight+hue bulbs are configured,

select Finish and press OK.

Ambilight+hue is ready for use.

Ambilight+hue Settings