Led Information; Error Codes - STACYC Stability Cycle Owner's Manual

LED INFORMATION

POWER THROTTLE
LED
SWITCH POSITION
bike could be in program mode(exercise caution with the
ON ZERO NONE
ON ZERO RED
ON ZERO YELLOW
ON ZERO GREEN
ON 5-10% G,Y,R
ON 5-10% Y,R
ON 5-10% R
motor will engage & drive bike at selected power mode,
ON 10%-FULL G,Y,R
motor will engage & drive bike at selected power mode,
ON 10%-FULL Y,R
motor will engage & drive bike at selected power mode,
ON 10%-FULL R

ERROR CODES

POWER THROTTLE
LED
SWITCH POSITION
Flashing
ON ZERO TO
YELLOW
FULL
Flashing
ON ZERO TO
RED
FULL
P a g e | P a g e | 16 16
SITUATION/ REACTION
throttle)
bike powered on and in "TRAINING/LOW"
power mode
bike powered on and in "NORMAL/MED"
power mode
bike powered on and in "ADVANCED/MED"
power mode
bike powered on and showing FULL
battery charge
bike powered on and showing MEDIUM
battery charge
bike powered on and showing LOW
battery charge
FULL battery charge
MED battery charge
LOW battery charge
SITUATION/ REACTION
ESC overload error, reset by turning POWER SWITCH
"OFF", then back "ON"
Temperature error, reset by turning POWER SWITCH
"OFF, then back "ON". Change riding conditions and
ride on flat ground to cool down STACYC.
DOC 001 REV A DOC 001 REV A P a g e | 17