Agitator Servicing - Kenmore 125.81614610 Use & Care Manual

WARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.
TO CHECK THE BRUSHES
New Brushes
When brushes are worn to the level of the
base support bars, replace the agitator
assembly.

AGITATOR SERVICING

Worn Brushes
Base
Support
Bar
- 22 -
TO REPLACE AGITATOR ASSEMBLY
1. Remove the floor brush from the
PowerMate.
2. Remove PowerMate cover, belt and
agitator assembly. See "To Remove Belt" in
BELT CHANGING AND AGITATOR
CLEANING (page 20).
3. Install new agitator assembly.
4. Reinstall belt and PowerMate cover. See
"To replace belt" in BELT CHANGING AND
AGITATOR CLEANING (page 20).
NOTE: To purchase a replacement agitator
assembly, call 1-844-553-6667 or visit
searspartsdirect.com